Call us if you want any technical advice / instructions on this product. Call us to see if this will do your job, 9 - 5 , 0115 9 333 321.........................
THIS SALE IS FOR THE FULL START UP KIT WHICH INCLUDES THE FOLLOWING:
-
1 x 60 SECOND UNIVERSAL PLASTIC REPAIR WITH BUILT IN APPLICATOR
-
2 x MIXER NOZZLES
-
1 x 15ml A9 PLASTIC ADHESION PROMOTER & SWAB
-
1 x SMOOTHING FILM
-
1 x REINFORCEMENT PATCH
THIS SHOULD BE OVER £39.00, AVAIABLBE NOW TOGETHER FOR ONLY £17.99!!
Easy to use two-part polyurathane based compound that when mixed together will dry to form the plastic that most automotive bumpers, trims & body kits are made from. Easy to follow instructions on each tube. Simple application through special 'mixer nozzles' means that the product mixes its self! Once dry can be flatted and painted, normally after just 60 sec
quick idea of how it works: YOU HAVE A BROKEN FAIRING, BUMPER, BODY KIT etc. CLEAN REPAIR AREA, SCUFF UP TO PROVIDE A KEY, APPLY A LITTLE A9 ADHESION PRIMER TO THE AREA, PUT MIXER NOZZLE ONTO THE RAPID RUBBER CARTRIDGE, CUT A PIECE OF MESH FROM ROLL THE SIZE OF THE REPAIR AREA, APPLY RAPID RUBBER TO MESH, PUSH FROM THE REAR OF THE APPLICATION AREA UNTIL ALL ADHESIVE IS SEEN, THEN APPLY SMOOTHING FILM TO THE OUT SIDE OF THE REPAIR AREA, LEAVE FOR 1-5 MINS, PEEL AWAY SMOOTHING FILM.
JOB DONE!!!
-
cure rate- 60 secs
-
repairs 99% of automotive plastics
-
metal to metal & plastic to metal bonding
-
ideal for broken plastic parts, head lamp brackets, lugs etc..
-
mixes its self!! in nozzle provided
-
use to fix body kits, bonnet scoops, wheel arches etc...
Masterweld Rapid Rubber two part plastic repair has been designed to quickly repair many varieties of plastics and rubbers including TPO type plastics. Generally used to repair cracked and broken automotive plastics such as bumpers, trims and spoilers. Ideal also for bonding of body kits. A suitable two part application gun and mixer nozzles are required for this product.
THIS SALE IS FOR 1 X FULL KIT.............£17.99
EXTRA Mixer tips in ebay shop for £ 7.99 x 12 tips
EXTRA Smoothing Film in ebay shop for £ 9.99 x 5mts
EXTRA Re-inforcment Mesh in ebay shop for £ 9.99 x 5 mtrs
MANY BUYERS ALSO WHEN ORDERING THIS WILL PURCHASE :
AEROSOL PLASTIC PRIMER
BLACK PLASTIC FILLER
SEE OUR EBAY SHOP FOR OTHER PRODUCTS OR CALL ME, BILL SHARPE
01159 333 3 2 1
Step-By-Step Plastic Repair USING PLASFIX 60 sec. FROM WAYSIDE ADHESIVES
|
1.
For most repairs the bumper cover needs to be removed from the vehicle.
|
2.
This is our damage, a break in the surface of a plastic bumper.
|
3.
The back of the broken plastic needs to be given some tooth to hold the repair materials. Use 80 grit by hand or on an orbital sander for this step.
|
4.
Apply a coat of our PLASTIC ADHESION promoter. This will help the repair materials bond with the plastic surface.
|
5.
Cut the appropriate size reinforcing mesh to extend about an inch beyond all sides of the damage.
|
6.
Apply enough repair material to allow you to spread it evenly over and beyond the area needing repair
|
7.
After rounding off the corners of the reinforcing material position it over the repair and...
|
8.
work the patch into the soft repair material with a spreader.
|
9.
Spread more repair material OVER the reinforcing mesh burying it. Then allow the material to harden then start on the front of the bumper.
|
10.
On the face of the bumper you sand the damage until it's slightly low and feather out the paint several inches beyond the work area. Use 80 grit for this step.
|
11.
Spray the area with Surface Modifier and allow it to dry the appropriate amount of time depending on the temperature at the time of repair.
|
12.
Apply a liberal amount of repair material so that you have enough to make the area a little too high.
|
13.
Using the proper size spreader for the amount of damage spread the repair material evenly over the the repair area. Be sure to push the material into the surface scratches then spread it evenly over the surface. Then apply the SMOOTHING FILM, this will reduce the amount of sanding
|
14.
Sand the surface smooth using 80 grit sandpaper. This can be leveled better by block sanding after it is initially cut using a power sander. I usually like finishing this step using 180 grit sandpaper.
|
16.
MASTERFIL PLASTIC can be used to finish the repair and to do any minor surface repairs.
|
Note:
Although Plasfix 60 was used on this repair Wayside's other products work just as well and don't harden as quickly.
|
WAYSIDE ADHESIVES ALSO SUPPLY THE FOLLOWING:
PLASTIC PRIMER AEROSOL
PLASTIC FILLER
PLASTIC ADHESION PROMOTER
|
Note:
After the repairs are finished the area is sanded and primed using PRIMA FILLA 3000 or a primer that has had a flex additive added. After priming the surface it is Guide Coated and block sanded to make the surface ready for paint.
|
Disclaimer: The ideas and methods described in this web site were developed under unique situations. Since these situations cannot be duplicated, you may get different results. Use and application of any of the site's content is at the user's own risk.
WAYSIDE ADHESIVES LTD. Copyright 2007
|
|
|
|
|
|
On 10-Sep-08 at 10:45:44 BST, seller added the following information:
GOOD KIT. CHEAPER THAN REPLACEMENT PLASTICS!! Buyer: sambarghout ( 171) 09-Sep-08 13:37 BROKEN CRACKED PLASTIC MOTORBIKE FAIRING REPAIR KIT (#320187539512) £14.99 View Item
On 22-Apr-09 at 20:29:41 BST, seller added the following information:
|
tthis stuff is brill repaired my merc bumper, it looks great would recomend. |
Buyer:
|
22-Apr-09 19:20 |
|
BROKEN CRACKED PLASTIC BUMPER TRIM BODY KIT CAR REPAIR (#370179583967) |
£9.99 |
|
On 24-Jun-09 at 09:19:43 BST, seller added the following information:
Simply the best plastic repair product I've ever seen - fantastic thanks :) |
Buyer:
|
24-Jun-09 00:59 |
|
BROKEN CRACKED PLASTIC MOTORBIKE FAIRING REPAIR KIT (#220385172667) |
£14.99 |
|