Technics1200s
"Your have the best... Treat it that way"
|
Up for Auction...
This Auction is for 1 Pair (Left & Right Channel) of
BLUE
6 Feet (1.8288 Meters) Professional Performance RCA cables with Neutrik / Rean 24k Gold connectors on one end & "Raw Ends" on the other.
Note: We can make the length anything under 6ft by request. (Example 3ft, 4ft, 5ft). There is no signal loss with any length under 10ft with our professional cables.
This will fit the following models:
Technics 1200 or 1210 MK2, M3D, MK3D, MK4, MK5, MK6, M5G, GLD, LTD.
Several cables are simply to thick for the Technics 1200 / 1210. Thicker is not always best. What some do is remove the original spacer to fit these over sized cables leaving the clamper to take on all the stress. As we have seen over the years the clamper is not designed for this and with time gets weak causing the clamper to loosen leaving all the pressure on the tie strap and solder points.
Our Pro cables are the thickest while still respecting the original design. Installation:
We have made it so the installation process is a smooth & simple procedure.
Tools Required: Phillips Screw Driver & Soldering Iron
Steps: Remove
Rubber bottom cover, Remove RCA Clamper & Spacer, Remove Tone Arm
Base Plate, Desolder Old RCA Cables from PCB. Solder on your New Cables
& apply a tie strap to hold the cables to new cables to the PCB. Put
it back together in reverse order. Your all done! Neutrik Rean RCA connectors.
Globally known in the industry as the professional standard.
|