| For sale is 1 x brand new complete transponder car key Convert your current key + remote into flip key This key includes transponder chip + all the electonic for central locking (instructions supplied on programming remote - Transponder chip will need to be program by locksmith Suitable for following Models from 2006 to 2011 Ford Falcon BF to FG models 10/2005 - 11/2011 XR6 - XR8 SY-Territory 10/2005 - 2011 Mondeo 09/2007 to 06-2009
Fast shipping from Australia We can cut and program the transponder chip for you see link below To program the remotes you will need to have all the remotes available for the car as you need to relearn them all. To program the key you will need to have 2 keys available for the car. we will start with remotes Sit in the car with the doors closed Turn the ignition to the ACC postition and press the rear demist button 3 times, within 5 seconds. You then press a button on the first remote to be trained , the door locks will cycle. Then press a button on the 2nd to be trained and the door locks will cycle again. Repeat this step for the the rest of the remotes to be trained to the car. The first keypad trained will result in one door lock cycle, the second will result in 2 door lock cycles, and so on. There is a limit of 8 remotes per car. Turn the ignition to the OFF position to exit the learning mode. Your remotes are now programmed to your car. Now for the keys You will need to have 2 orginial keys available if you wish to train a new key follow the elow instuctions. If you only have 1 working key it will need to be programmed by dealer or locksmith (the procedure listed below will not work) ensure you have all keys present during recoding as any key not present will be removed from the memory. Sit is the drivers seat with doors closed Put the first coded key into the ignition & turn to the ACC position. Turn this key to the OFF postition & remove the key. Within 5 seconds put the 2nd coded key into the ignition & turn this key to the ON postition. Turn this key back to the OFF postition and remove the key. The door locks will then cylcle to indicate that the learning mode is active. Within 5 seconds put the new 3rd or new key into the ignition & turn to the ON postition. The door locks will cycle 3 times to indicate the 3rd key has been trained , ensure you wait for the locks to finish cycling before turning the key to the OFF position. Repeat this step for any following keys , The 4th key trained will cycle the locks 4 times, and so on. you can train up to a maximum of 8 keys. your new key should now be coded to your car We can cut and program these keys for you extra charges apply for this service see link product is after market (no Logos) BUY FROM LOCKSMITH DIRECT **WE ARE LOCATED IN BRISBANE AND OFFER A PROFESSIONAL KEY CUTTING AND PROGRAMMING SERVICE USING THE LATEST HIGH TECH DIAGNOSTIC EQUIPMENT. CHECK OUT OUR EBAY STORE FOR GREAT DEALS OR MESSAGE US TO ENQUIRE ABOUT YOUR CAR
If you require item quickly we recommend express post this can be done in ebay checkout Items are posted within 24 hrs during business hours from Brisbane Please allow 5 to 10 business days for delivery with Australia Post
|
