Listing is for a Tachometer and a four gauge set. 

Fits IH Tractors Gas International 340 Utility, Farmall 340 tractors

These four gauges have 2" / 52mm Dashboard Holes,  Yellow Zinc "Cad" plating for corrosion resistance protection. They also have mounting studs and brackets, rubber gasket seal for mounting flush to dash, metal case with glass lens. They have 6 V light feature included so owner has option to use or not to use.

This tachometer assembly replaces part number: 371243R93, also replaces number IHS 940
The  tachometer diameter is 3 3/8" (85mm) and has a 5/8" UNF cable end.

Temperature gauge: replaces IH part numbers 353868R91, 53690R2, 369849R91, 393476R91
IHC logo and part number on face.  Temperature is measured in 3 zones. Black face with white lettering and colored zones to gauge temperature. Water temp gauge includes a 72" spring covered capillary lead. 5/8-18 U.F. END W/ 1/2" NPT PIPE BUSHING   

Oil pressure gauge: replaces IH part numbers 362039R93, 362177R94 and 536696R2
This gauge also has a 1/8" NPT male fitting,

Amp gauge: replaces IH part numbers 360053R91, 378424R91 and 393334R1

Fuel Gauge: 371056R91 Also Fits 371056R92
Fits Farmall / IH Tractors: 340 
This is for a Rochester style gauge, 0-70 Ohm's. Will not work with Stewart Warner sending unit (32 Ohm full to 244 Ohm empty) Gauge works with 6 or 12 volts

Let me know if you need a 12 volt light when you pay, 

Also available with Led light option (6 or 12V) Our Listing number: 324358162645


*Before you buy this gauge and then install the fuel gauge: Get a good electrical manual for your machine from the manufacture. You need to be 100% sure of your fuel gauge wiring circuit is 100% correct! and weather or not the correct sending unit is in the existing fuel tank examples: universal sending unit with improper ohms and or wiring, custom units because original is no longer available, other manufactures have different ohms.(a lot of things happen to these tractors in 60 years, I see it on the restorations that I do from time to time). I can not return so called defective electrical units to manufacture that are hooked up incorrectly. I will only take gauge back if it has not been installed and you pay the shipping! Or If it is TRULY DEFECTIVE!! Most of the sales are without issues because proper installation has been followed. I am a 33 year ASE Master Tech myself and I run into a lot of splicing and rewiring of tractors. Also other different parts used from other models. *

Tractor: Farmall / IH International 240 and others

Gauge works with 6 or 12 volts!

From what I am told and what I have found out on my own 240's  that the gauge sending unit is not available for these 240's. I am informed that the gauge sending unit that will work for these 240's is purchased through local Case IH dealer. It is for a 444 or 2444 fuel tank and was part # 84270826. It cost about $60.00. Look it up on Case IH's website.  If you use this one keep in mind that one of the bolt holes is located off a little bit so it fits only one way when mounted.

If your looking for the tachometer cable that goes with this tach, and would like to purchase one. This is my eBay listing number for my tach cable: 321651489621 


Ships within same business day
If paid by 3:00 PM (PST) Mon Thru Sat
Orders on Holiday's and Sunday's ship next business day





OUR # IHTMP72
OUR# IHO362039R91-SM
OUR# IHA360053R91
OUR# IHF371056R91
OUR# IHTCH340

Feedback:

We strive to provide the best service possible and 100% customer satisfaction. If for any reason you are not satisfied with your purchase, please contact us prior to leaving neutral or negative feedback and/or opening a case against us. We will do whatever is necessary to remedy the problem and to ensure your satisfaction.

Store Return Policy:

Customers have 30 day of purchase date to request return of an item. All return items must be in the condition it was received meaning the item is never installed or modified and kept in the original packaging otherwise you will be subjected to a reduced refund. It is the responsibility of the customer to repack the items for the return. We will not give credit or refund on any returned package that is damage due to insufficient packing or missing hardware & accessories.                              

Disclaimer:
Randppartsco parts listed are Aftermarket parts and not manufactured by the (OEM) Original Equipment Manufacturer. Original manufacturers names, logos, part descriptions and numbers are for reference purpose only. This does not intend, indicate and or suggest that our parts are manufactured by the original equipment manufacturer(s).

All Randppartsco Aftermarket listed parts are "Compatible with" will "Fit" and or made "For":  Farmall, IH, International Harvester, Ford, Allis Chalmers, Massey Ferguson, Massey Harris, Oliver, Cockshutt, Minnieapolis Moline, Willys, MB, jeep, Case-IH, Case, David Brown, John Deere, JD, Kubota, New Holland, NH, Avery, Long, White, Perkins, Volvo, Oregon, Leyland, Iveco, Fiat, Honda, Exmark, Stihl, K&N, MTD, Scag, Wright MFG., Murray, Wizard, Western Auto, Troy Built, Rally, Cub-Cadet, Ariens, Atlas, Techumseh, Husqvarna, Bobcat, E-Z-Go, AYP, Fiat Hesston, NGK, Champion,  Hinomoto, Deutz Allis, GM, Chevrolet, Craftsman, Poulan, Mitsubishi, Universal, McCormick, CNH, MTD, Yanmar.