The power rating is for intermittent amateur (400W CW or 400W SSB) use and not for AM broadcast or constant carrier data modes.  For AM broadcast a much higher power BALUN is required."

How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit. A 6:1 UNUN transformer is located in an IP65 weather sealed box at the bottom of the 6 meter telescopic aluminium element.  The transformer reduces the impedance at the feed point to a more acceptable level making the antenna much more efficient and allowing proper and easy tuning via an external ATU and  automatic ATU’s found in most modern radios.

The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.

The Highlighted bands in the chart below will require a manual ATU, the others an internal ATU.

Frequency                 VSWR

3.5 MHz 80 m     with Manual ATU 1.1

7 MHz 40 m       with ATU 1.1

10 MHz 30 m   , with ATU 1.1

14 MHz 20 m     with ATU 1.1

18 MHz 17 m     with Manual ATU 1.1

21 MHz 15 m     with ATU 1.1

24 MHz 12 m     Manual ATU 1.1

28 MHz 10 m     with ATU 1.1

50 MHz  6 m      with Manual ATU 1.1