- High Pressure Oil System IPR Air Test Fitting -
Test it the right way!
Each year Motor Magazine selects the Top 20 most innovative new tools in the automotive industry. We are pleased to announce that the 6.0L IPR Air Test Tool was selected to receive this highly coveted award for 2014. See the photos above for a clip of the Motor Magazine article. Due to popular demand we now offer the IPR air test fitting / tool for the 7.3L engine also.
Also Fits
International T444E, DT466E, and CAT 3126
THE PROBLEM:
7.3L Powerstroke engines may experience hard start and or no start issues. In some cases the no-start issue may occur only with the engine hot. If the observed ICP pressure during cranking is less than the required 500 PSI, then the problem is in the high pressure oil system. One of the first checks that should be made is to remove the plug from the top of the high pressure oil reservoir (in front of the fuel filter) to observe if the reservoir is full. If the oil is standing within an inch of the top of the reservoir, then the problem is in the high pressure oil system and could be caused by one of three things:
- The high pressure oil pump itself
-The IPR Valve
- A high pressure oil leak
The 7.3L IPR Air Test Tool will allow you to quickly determine which of these is the case (without unnecessary and costly parts substitution) by performing the following:
1. Remove the IPR valve and pressurize the system with shop air. Listen for air leaks. External high pressure oil leaks would have, of course, been obvious. The primary concern is internal leaks under the valve covers. These could include leaking injector orings, or leaking injectors. Listen for any leaks under the valve covers and correct if present. If the center injector oring fails high pressure oil could be leaking back into the fuel system. Remove the fuel filter cap and observe for air bubbles in the fuel. If necessary, individual fuel lines running from the fuel filter assembly to the cylinder heads can be disconnected in order to isolate the problem.
2. If no air leaks are observed, the next step is to isolate whether the problem is with the IPR or the high pressure oil pump. Remove the IDM fuse or unplug the IDM or injector connectors at the valve covers to prevent starting. Close the valve on the IPR air test tool and crank the engine. (This step effectively deadheads the high pressure oil pump - this is an approved procedure per Ford factory service info.) If the ICP pressure is now above 500 PSI, the problem is a bad IPR valve. If the pressure is under 500 PSI, then the problem lies with the high pressure oil pump.
ABOUT THE TOOL
Each tool comes with three extra sets of o-rings.
PATENT PENDING
OPTIONS
You can purchase the tool in two different configurations:
1. Complete tool with IPR replacement fitting, heavy duty hose, and shutoff valve assembled (This Listing). Most professional technicians who do a lot of work on the 7.3L Powerstroke should choose this option. The ability to "air-up" the system and then trap the air pressure by closing the shutoff valve allows even the smallest leaks to be detected. The absence of any unwanted air noises from leaking air lines connected with quick connect couplings makes locating the real problem easier. The hose itself makes an easy "handle" to thread the fitting into the back of the high pressure oil pump which is in a somewhat difficult location.
2. IPR replacement fitting only (See our Ebay Store). This cost-saving option is intended for lower volume users such as individual truck owners. At less than the cost of one hour of diagnostic time in most areas, this tool can save your hundreds or even thousands of dollars.
USAGE NOTES
-
The complete system can be tested in under 20 minutes - in a professional repair facility this tool will pay for itself after one or two repairs.
- As with any air tool, you will need to add your own air line quick-connect fitting. Since there are so many various air fitting in use, it is impractical to provide this part.
- Auto repair activities are hazardous. Always wear protective eye-wear. This tool is intended for usage by trained professionals. By using it you are certifying that you have the necessary skills and training to do so safely.
Found the Problem?
We carry the repair parts you need.
- Quality OEM Injector Orings
- Complete injectors
- High pressure oil pumps
- IPR Valves and Seal Kits
We welcome you to visit the 7.3L section of our Ebay Store for these parts and many more.
- For the original 6.0L IPR Air Test Tool, please see the 6.0L Section of our Ebay store. -
Thank you
Terms and Conditions:
- PLEASE READ -
We strive to provide "100%" customer satisfaction by offering the best combination of quality, price, speed, and service that you will find anywhere on or off Ebay. We value your patronage.
Domestic Shipping
We strive to ship all orders within 24 hours on business days (holiday periods excluded). If a delay occurs that is longer than would normally be considered commercially acceptable, we will attempt to contact you. Please be aware that time zones and scheduling may not allow same-day shipping in some cases. If a shipment is especially urgent, please contact us, and we will do our best to accommodate your needs - next day options may be available.. In addition to allowing at least 24 hours for shipment, please allow 2 - 3 days for Priority mail, 1 - 2 days for Express mail, and 1 - 5 days for UPS. Shipping costs are available to you through Ebay before bidding. If you do not find the shipping cost acceptable, please do not bid. We also think shipping cost are high - but unfortunately, cannot control them. Giving us a low rating because of shipping costs is unkind and does not benefit anyone.
As per Ebay policy, we will ship to your registered Paypal address only. Please make any needed address changes with Paypal before purchasing.
International Orders:
When placing an order from outside the USA, please use caution when selecting your shipping option. First class mail is an economy service and may take 30 days or more in some instances. First class mail is also not trackable. Priority mail International averages 7 - 10 days, and Express 3 - 5 days. These times will vary by country and can be longer if there are customs delays.
We are a legitimate business and will NOT falsify customs documents - please do not ask.
Returns
Each item in our Ebay store has its own return policy. Please take a moment to read it. With rare exceptions in case of a gross error on our part, shipping costs (either original or return) are NOT refundable. (Local auto parts stores will not pay your travel costs to return a part either.) Shipping costs will be deducted from refunds on "free shipping" items.
Applications
We guarantee our parts to be as described by part number, picture, and verbiage. While we do our best, vehicle applications, however, simply cannot be guaranteed. In most cases, we do not generate application lists. It is the nature of the auto parts business that, in rare cases, a part will not be correct for a certain vehicle even though it "should" fit. This may occur because of errors on application lists, mid-year production changes, changes to the vehicle since it was built, the fact that a car was not built for the US market, etc. It is the buyer's final responsibility to visually verify that the part they are purchasing is correct for their vehicle. If a part does not fit your vehicle, this does not mean the part is "not as described."
Payment
We accept Paypal as well as all major credit card directly through Ebay. If you need other payment options, please contact us.
Feedback
If you have a problem with an item purchased from us, please let us know before leaving feedback and we will work toward an equitable resolution. We really appreciate 5 star seller ratings in every category – if we can do something to improve toward meeting this goal, please let us know - we do value customer input. If you are prone to hostility in the event of a problem, please do not purchase here. Problems can be solved much more easily when civility is kept intact.
Warranty
All of our products are covered by a warranty. Please see details in each individual listing for length and terms as well as the warranty statement on our website. Warranty covers parts only. We do not warranty labor unless specifically stated. In absolutely no case will there be any warranty for loss of use, towing, incidental or consequential damages, etc.
Manufacturer's names, numbers, etc, are used for reference purposes only, Accurate Technical Services, LLC is not affiliated