This auction is for the "Newest Version".  We've included a picture of the "old style" so you can compare it to your previous remote.  Additional details are below.  Please ask us any questions you may have.

CONTENTS
The Stinger transmitter is a very small (1-5/8" x 3" x 1/2") visor style remote operating at 318 MHz. The Stinger achieves its small size by using state-of-the-art, surface mount components. It has been designed for use with the Allstar 9 Dip systems.

CODING
Access to the Stinger's toggle code switch is achieved by sliding down the front cover. Set the NINE-digit toggle code switch to match the code set in the receiver. Move switches using a small pointed object, such as a paper clip. Gently switch the small switches to either + or - positions. When complete slide front cover back into position

OPERATION
Once the codes are set to match the transmitter codes, you may test the system. Ensure the gate or door is visible and clear before testing.
Step 1- Push the Stinger's button from a distance of about ten feet. If the receiver activates, the switches are properly set.
Step 2- Test the transmitter from several locations to discover any "blind spots" caused by interference.

BATTERY ACCESS
Slide front cover down to reach battery compartment. Be aware of battery polarity when replacing the A23 battery.

TECHNICAL SPECIFICATIONS
Operating Frequency-318 MHz
Number of Buttons-1
Battery-1 ea. 12V A23
Number Combinations- Lots :-)
Operating Temperature- -20F - 100F
Overall Dimensions-1/2" x 3" x 1-5/8"
Weight-1 oz.

COMPATIBLE
Allstar 9931, Allstar 9931T, Allstar 9931mt, Heddolf P220,