Black Worm Drive Clamps

The Mikalor W3 black series of hose clamps feature a corrosion resistant full AISI 430 grade stainless steel band, housing, and screw.

Exclusive design of the housing and a high-strength screw.

9 mm band, smoothed on the underside, combined with the bevelled band edges protects the hose from any damage.

This worm drive clip is very suitable for clamping water hoses, turbo pipes and all manner of automotive hoses.

Product Details:

Material:
Band and Housing: Stainless Steel AISI 430

Screw: Stainless Steel AISI 304

Finish: Delta Seal Black Resistance coating

Size: 8mm-100mm

Easy To Install

Well known and credited brand

Rolled edges to protect from hose damage

Mechanical locking system improves effective tightening

Black Coating for extra corrosive protection

Quantities:

Sold in Singles

Additions

Flexi Driver:

The Flexi Driver is designed to access hard-to-reach areas with ease, thanks to its long and flexible neck.

Flexi Driver Link

Box Set:

Box set of clamps that offer a bulk discount and comes with a storage box, This is an excellent way to acquire a large quantity of clamps at a reduced price while keeping them organized and easily accessible.

Box Set Links

How To Install:

Make sure you have a Slotted Screwdriver or flexi driver and loosen

the bolt enough to get over the pipe or hose.

Slide clamp over hose.

Connect hose to connector, make sure the connector is far enough in.

Tighten the bolt up firmly, not exceeding the recommend torque.

Test it's tight enough and there are no leaks.

How To Decide on The Size:

Always measure the outside (O.D) of the hose, not the internal diameter (I.D), then match the outside diameter of the hose to the inside diameter of the clamp. If the hose is 57mm outside diameter, use a 50-70mm clamp.

How To Remove:

Loosen the clamp bolt enough, you can slide it with no effort along without damaging the hose.

Take the hose off the connector and slide the hose clamp off.