IF range - 28 ... 32 MHz IF input power - 1 ... 50 mW / 0 ... 17 dBm (0.05 W max.) LO frequency - 116 MHz (3rd overtone of 38.6666 MHz crystal) LO frequency stability - +/- 3 ppm Output power - 10 ... 15 W RX gain - typ. 20 dB Noise figure - typ. 1.0 dB Image rejection - typ. 70 dB PTT control - Contact closure to ground Supply voltage - +13.8 V DC (+12 ... 14 V DC) Current consumption - typ. 1.3 A (TX) TX Output transistor - RD15HVF1 RX Input transistor - BF998 Dimensions (mm) - 80 x 45
If you're going to connect this transverter board to the radio that has 100 W output power the some sort of attenuator between your radio and this transverter board is necessary. We designed a simple attenuator board which contains a few resistors and couple relays only. You can easily build it yourself.
Or you can buy the built and tested ATTENUATOR BOARD there
In case you were going to connect this transverter board to the FLEX Radio then NO attenuator board is required.
In respect and to the favour of our buyers we put the TRANSVERTER BOARD and ATTENUATOR BOARD together in a ONE SALE as just the boards or as the KIT with a BOX and other parts.
To buy the 144 MHZ TRANSVERTER + ATTENUATOR BOARDS together there
This sale is not including the attenuator board, heatsink, power and RF connectors, wires or cables. You are getting what you see on the pics.
Also we are offering the ASSEMBLED TRANSVERTER IN BOX or the KIT.
144/28 MHZ ASSEMBLED TRANSVERTER IN BOX there
144/28 MHZ TRANSVERTER + ATT. BOARDS + ENCLOSURE KIT there
The OTHER BANDS TRANSVERTERS you can find there