Viper H5LAL777A replacement transmitter keyless remote clicker keyfob control
Item Description
1) List these remotes with a picture of the front, the back, and the circuit board IF INDIVIDUALLY LISTING.

2) Do not include pictures of the circuit board if listing as stock photo.

 Stock Photo

Minimal case scuffs & no cracks

See pictures for an example of what you will receive.

 This item is pre-owned – it will work like new once programmed to your vehicle

 One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Automate / Equalizer / Hornet / Pro Guard / Python /

Sidewinder / Steal Stopper / Viper / U.S. Auto Security

 

FCC ID: H5LAL777A

Interchangeable FCC IDs:

H5LAL777A

J552318T1

ELV55AAL777T

ELV55AAL777A

  Interchangeable Part #s:

465

460

493

465T

460T

493T

LED color: Red

 Interchangeable circuit board #s

777B

777G-1

758-2

777A

777B-2

758-A

758-4

777A-5

 Frequency: 301 - 302 MHz

 1 button

 Battery: (1) 23A

 

Compatible with the following systems:

Viper

100

150

300

350 classic

400

450

500

550 classic

600

600 classic

Valet

519T

711T

712T

 

AutoMate

3

4

6

7

8

Hornet

710T

715T

717T

730T

740T

755T

Steal Stopper

50

50/s

60

60/s

70

80

1000

Wasp

718 W (only some)

CrimeGuard

328i 2

328i2 6

328i3 6

328i4 1

350i5 1

5000 7

5000-C 2

5000-F 7

5000-L 7

533i 2

533i2 6

533i3 6

533i4 1

650i5 1

7000 7

745i 1

745i2 6

745i3 6

745i4 1

750i5 1

850i3 1

850i4 1

850i4E 1

850i5 1

9000 7

 

Excalibur

AL-500 1

AL-500 SPORT 1

AL-500 CF 1

AL-532T 3

AL-632-H 1

AL-632-L 7

AL-700 ATV 1

AL-700 EX 7

AL-700 EZ 7

AL-700 GT 7

AL-700 H 1

AL-700 LC 7

AL-732 LC 7

AL-770 7

AL-770 GT 7

AL-770 L 7

AL-770 LC 7

AL-790 7

AL-790 D 7

AL-800 7

AL-832 7

AL-900 ATV 1

AL-900 ATV2 1

AL-900 ATX 7

AL-900 ATZ 7

AL-900 GTX 7

AL-900 HX 1

AL-900 JX 2

AL-1000 ATV 1

AL-1000 ATV2 1

AL-1000 SH 1

AL-1000 SX 2

AL-1000 E 1

AL-1000 EDP 1

AL-1500 E 1

AL-1500 EDP 1

AL-1810 EDP 1

AL-2000 E 1

AL-2000 EDP 1

Excalibur Gold

EG-1200 ATV 1

EG-1400 ATV 1

EG-1600 ATV 1

EG-1800 ATV 1

 

Executive / Model One

E-2100 4

E-2100 ATV 4

E-2300 4

E-2300 ATV 4

E-2500 4

E-2500 ATV 4

E-3000 4

E-3000 ATV 4

 

Model # 1.1 3

Model # 1.2 3

Model # 1.3

Model # 1.3 1

Model # 1.7 RS 3

Model # 1 ATV 3

Model # 2 ATV 3

 

Freedom / FBI

150 1

150-E 1

200 1

200+ 1

200+2 1

200+P 1

300 1

300 ATV 1

400 5

410 4

410 5

411 4

411 5

411 ATV 5

450 1

500 1

515 4

515 5

517 4

550 1

550-CF 1

550-SPORT 1

650 1

Other Systems:

AU-REC-1 7

AU-REC-1 LC 7

AU-REC-2 7

AU-REC-2 ATV 1

AU-REC-2 LC 7

AU-REC-4 (T) 7

AU-REC-6 ATV 4

AU-REC-6 S 4

AU-REC-7 ATV 4

AU-REC-7 ST 4

 

C-2 1

C-2+ 1

C-2+2 1

C-2+P 1

C-3 1

C-3 ATV 1

C-4SRS 3

C-5 1

C-5+ 1

C-514 4

C-515G 4

C-6 1

 

Comfort Start 1

 

MC-1 1

 

Mercury 1

Mercury 2 1

Mercury-SS 1

 

AU-REC-8 3

AU-REC-9 3

AU-REC-10 3

AU-REC-11 3

 

RS-7K 1

RS-7K2 1

RS-22 1

 

SYSTEM-25 1

 

K-9

150-D 1

150-E 1

 

Classic-E 1

Classic-EDP 1

Five Classic 1

 

Eclipse 1

 

One ATV 5

One 7

 

Two 7

Two C 2

 

Four 7

 

Five T 1

Five 7

Five ATV 1

Five C 2

Five F 7

Five L 7

 

Seven 7

Seven GT 7

Seven L 7

Seven LC 7

 

Six ATVS  1

Six ATV 1

Six ATV 2 1

Six C 2

Six CP 7

Six DIP 7

Six H 1

Six L 7

Six 7

 

Mundial SS 1

Mundial SS+ 1

Mundial SST 1

Mundial 1

Mundial 2 1

Mundial 3 1

Mundial 4 1

Super Mundial 1

M.A.T.

Five 7

5 ATV 1

5 C 2

5 F 7

5 L 7

5 T 1

Six 7

6 ATV 1

6 C 2

6 DIP 7

6 H 1

6 L 7

7 EX 7

7 EZ 7

7 L 7

Eight 7

9 ATX 7

9 ATZ 7

9 GT 7

9 LCX 7

10 ATV 1

10 SH 1

10 SX 2

Mars

11 1          11+ 1          22 1          22+ 1          32 1          32+  1          33 1

 

Programming Instructions:

PROGRAMMING METHOD #1

STEP 1:

Look for a WHITE STICKER on the inside of an existing remote or the outside and/or inside of the main alarm/keyless entry brain.

On the 460T & 465T:

An EXAMPLE would be: 209AD or 1AF2D

This is your programming code.

 On the 493T:

An EXAMPLE would be 322431A (It may or may not have an "A" at the end).

This is your programming code.

Once you have located your code, you can determine the correct traces to be cut on your new replacement remote below:

STEP 2:

Take the new remote apart with a small Phillips screwdriver and pry open the remote case carefully.

Next, remove the battery and gently pull outwards on the circuit board to pop out the circuit board guts. Flip the circuit board over to reveal the trace numbers with either a group of five set of numbers ranging from 1, 2, 5, 6 or 2 rows of numbers ranging from 1 thru 12. After you have determine the correct traces to be cut, grab either a small, sharp flat tip Jewelers screw driver or a Dremel tool with a small cutter bit and carefully notch out each number trace as required by Step 1. Once done, double check your circuit board traces and assemble the remote back together and try on your alarm, remote starter or keyless system. If un-successful, take the remote apart again and recheck

all the traces to insure that each cut has been completely interrupted. If un-sure on programming this remote, try locating a local electronics store or DE I Dealer for further help.

 

PROGRAMMING METHOD #2

Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:

1) Turn the vehicle's ignition to the "on" position

2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.

3) Press the large/ lock button on your remote (for Freedom 500, C-5, and K9 Mundial2, press 2nd or 3rd channel. For MARS-22, press Lock & Unlock at the same time). The alarm should respond with a short siren chirp.

4) Repeat step 3 for each additional remote that is to operate the system (up to 4 remotes).

Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #3

Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:

1) Turn the vehicle's ignition to the "on" position

2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.

One Button Remote:

3) Press the button on your remote. The alarm should respond with a short siren chirp.

4) Press the valet switch one time.

5) Proceed to step 6.

Two button remote:

3) Press the large button on our remote. The alarm should respond with a short siren chirp.

4) Press both buttons at the same time. The alarm should respond with 2 short siren chirps

5) Press the small button on your remote. The alarm should respond with 3 short siren chirps.

Three button remote:

3) Press the large button on your remote. The alarm should respond with a short siren chirp.

4) Press the small right button on your remote. The alarm should respond with 2 short siren chirps.

5) Press the small left button on your remote. The alarm should respond with 3 short siren chirps.

6) Repeat steps 3-5 for each additional remote that you wish to operate your system (up to 4 remotes).

Please Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #4

Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:

1) Turn the vehicle's ignition to the "on" position

2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.

3) Press the valet switch to enter your secret override code. If a code has never been programmed, press the valet switch one time. The alarm should respond with a long siren chirp.

4) Press the large/ lock button on your remote. The alarm should respond with a short siren chirp.

5) Repeat step 4 for each additional remote that is to operate the system (up to 4 remotes).

Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #5

Before you begin, your system must be in a disarmed state.

1) Turn the vehicle's ignition from "off" to "on" 5 times within 7 seconds. The system should respond with a horn honk or the doorlocks will lock then unlock.

2) Press the large/ lock button on your remote. The system should respond with a short horn honk or the doorlocks will lock then unlock.

3) Repeat step 2 for each additional remote that is to operate the system (up to 4 remotes).

Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #6

This type of alarm automatically enters transmitter programming mode upon power up. Before you begin, make sure that all points of entry (doors, trunk, hood) are closed. If there is a hood pin switch, have a friend hold it down or temporarily disconnect it. The system will not enter programming mode if it detects an open point of entry.

If the system has been without power for more than 24 hours:

1) Apply power to the system.

2) Press the large/ lock button (Press small center button for Freedom 400) on your remote. The system should respond with a short siren chirp.

3) Repeat step 2 for each additional remote that is to operate the system.

If the system has had power within the last 24 hours:

1) Disconnect and re-apply power.

2) Press the large button (Press small center button for Freedom 400) on any remote that does not already operate the system (this is how the system determines that you want to program transmitters). The system should respond with a short siren chirp.

3) Repeat step 2 for each additional remote that is to operate the system.

Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #7

Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:

1) Turn the vehicle's ignition "on" then "off".

2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.

3) Press the valet switch one time to enter transmitter programming mode.

4) Press the large/ lock button on your remote. The alarm should respond with a short siren chirp.

5) Repeat step 4 for each additional remote that is to operate the system (up to 4 remotes).

Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.

PROGRAMMING METHOD #8

Transmitters for this model alarm are coded from the factory. The transmitter has to be modified to match the code of your alarm. If you need a replacement transmitter for your alarm, you will need to open the transmitter shell (there is typically a small phillips head screw in the back that must be removed first). You will need to look on the circuit board for a white paper sticker that has a 5 or 6 digit code that will start with 1, 2, or 3. You will need to provide this code to your dealer or Omega at the time of purchasing the transmitter so it can be pre-coded to operate your alarm.


Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

About Us

Keyless Remote Warehouse is a family-owned company located in North Central Pennsylvania who sells keyless remotes at fractions of dealer prices. We carry almost all OEM factory keyless entry remotes AND aftermarket remotes that work with systems your vehicle may have had installed after they were already manufactured. We pass on our cost savings to you so that you can have the luxury of an affordable keyless remote control for your car, truck, SUV, or minivan. We have been in business since 2005 and are one of the few veteran sellers on eBay today. We have survived the ever-changing e-commerce industry modifications by treating our customers as the #1 priority. The simple truth is these items we sell are very complicated, especially for people who do not know a lot about them naturally. What sets us apart from the other sellers is that we are an American-based company ran by an American-based family. We are reachable for questions and are not a storefront for a China import operation, which seems to be more and more common now-a-days.

Payment

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days.  
PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Shipping

U.S. DOMESTIC SHIPPING: 
(Default) FAST N' FREE USPS First Class: Free
USPS Priority Mail: $6.97
USPS Express Mail: $34.97
FedEx Standard Overnight: $45.99

INTERNATIONAL SHIPPING 
: We ship everywhere in the world through eBay's Global Shipping Program.

Terms

Program Remote To Your Vehicle

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle?s installed RKE (remote keyless entry ) system:

1.   Some years require diagnostic programming according to how the manufacturer set the system

         a.   Free programming Requirements per manufacturer upon request

         b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle?s ?.

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer?s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool ? we do not write the programming ? we pass it on to you as a courtesy.

How to find out if this remote is compatible with your Vehicles? installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #?s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

 Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

 Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

Returns

Warranty/Returns:   
1.   30 day return policy.  
2.   All returns for replacements or refund will need to CONTACT US via eBay messages to be issued an RMA # & proper return address.  
        NO REFUNDS OR REPLACEMENTS WILL BE GRANTED WITHOUT AN RMA#
3.  Please Note: Each remote, circuit board, shell/case, button pad, Key & battery are UV ID?d prior to shipment  ? All returns receive a UV ID 
inspection to verify originality of remote sent prior to refund or replacement.
4. All cut keys are subject to a $20 deduction in refund on returns.

Return/Exchange Policy and Procedure
If you purchase this keyless remote control and it DOES NOT WORK with your vehicle AFTER;
1.	 attempting to PROGRAM it 
2.	or have it programmed by a qualified automotive LOCKSMITH; 


PLEASE CONTACT US VIA EBAY MESSAGES: Our knowledgeable Customer Service Staff will assist you in troubleshooting to get your remote working for you
 or to help you find the correct remote for the vehicle's installed RKE system. 


Our RETURNS DEPARTMENT will:

1.	Give you an RMA# & Return Address Details during this process

2.	RMA# = return the item for a REPLACEMENT

3.	Or RMA# = return the item for a REFUND
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.