Pigment can be used with condensation cure & addition cure silicone. Mixing pigments into a white silicone base can result in lighter shades of the colour intended. e.g black pigment will become grey / dark grey. For optimum results we recommend using these silicone pigments with translucent or non pigmented silicone bases.

The Colour Shown in the pictures above should be used as a guide only due to the varying degrees in monitor colour management, they have been mixed with Translucent T4 silicone to give an opaque cast, to achieve the correct colour saturation we always recommend to cast a small trial object/sample to make sure the pigment is mixed at the correct ratio, pigments can be mixed to achieve various colours.

Mixing Ratio recommended no higher than 5% pigment to total weight of silicone. Higher quantities may result in cure inhibition.

If you are purchasing silicone with a pigmented catalyst you will need to purchase a clear catalyst as the colour of the catalyst pigment will have an obvious effect on the silicone pigment. Please take note that 25g is not a large quantity. Using the pigment at a 5% mix will only cover 500g of silicone. Pigments may be used at lower ratios but this will effect colour density.

Not for use with food grade silicone.