This very powerful welding rectifier was built with a use of IGBT technology, for manual welding DC and AC TIG and electrode welding ( MMA method ), structural steel , and quality aluminum. It is recommended for commercial and craft workshops.

The machine is the latest generation of equipment intended for professional use. It is made in IGBT technology and equipped with a digital control. Is used for manual welding TIG HF and TIG Lift steels and non-ferrous metal DC and AC. The device provides the option of welding MMA (coated electrode).The device provides full digital regulation and control of the arc welding parameters and pulse as well as the choice of AC waveform.

It has a HF-voltage ignition, ARC FORCE switch 2T / 4T and display for the welding current and sets the memory. Welder has a memory of the last setting, ie after switching off and then return to the last set parameters. There is also the possibility of memorizing 20 sets of parameter settings and pulse welding current. Complete with TIG welding torch, wire electrode and ground cable.

The welder is recommended for welding professionals.

Functions:

• AC/DC smooth balance
  
• Slope up and down
  
• Pre/post flow time gas regulation
  
• MMA
  
• HF
  
• 2T/4T
  
• Rising/falling current
  
• AC frequency regulation
  
• LED display
  
• Full digital control of welding settings
  
• 20 welding settings to memorize
  
• Electrode cleaning function
  
• VRD
  
• Hot Start
  
• Arc Force
  
• Anti Stick
  
• Pulse 
  

• Catalog number: 7811876
  
• Supply voltage [V]: 50Hz AC 230
  
• Welding methods: TIG AC / DC MMA
  
• Technology: IGBT
  
• Welding current [A]: TIG 200 / MMA 180
  
• Duty Cycle [%]: 60
  
• State voltage without Load. [V]: 67
  
• Max. current consumption [A]: TIG: 26.6 / MMA 19.6
  
• Max. power consumption [KVA]: TIG 5.7 / MMA 4.1
  
• Adjust the welding current: Liquid
  
• Pre-gas [s]: 0.1-15
  
• Post-gas [s]: 0.1-15
  
• The Current [s]: 0-15
  
• The sinking current [s]: 0-15
  
• Initial current [A]: 5-200
  
• Base current [A]: 10-90% of the welding current
  
• Crater current [A]: 5-200
  
• Pulse frequency [Hz]: 0,5-999
  
• The pulse duration [%]: 10-90
  
• AC frequency [Hz]: 1-250
  
• AC balance [%]: 15-50
  
• ARC FORCE [A]: 0-100
  
• Mass [kg]: 17
  
• Dimensions (L x W x H) [mm]: 480 x 200 x 330
  

•     Sherman DIGITIG 200 AC/DC Multipro welder inverter with 2 pin EU style plug  
•     Welding holder T-26 / 4m
•     Electrode cable
•     Mass cable
•     Manual in Polish, English version available on request
•     Warranty card (2 years for end customers / 1 year for businesses)

If for any reason you do not feel satisfied with your purchase, please get in touch with us on the contact details visible in this listing or in the Business Information section on the very bottom of this listing page. We believe we can resolve any issue that might arise after the transaction.

All our products are stored in one of our UK warehouses for which orders placed before 1.00PM GMT are shipped on the very same day, and delivered within the next 24h to any place within the UK mainlands.

*Deliveries to the UK mainlands heavier than 10kg are for free. If your delivery address is located in any other UK region like Scottish Highlands, Isle of Man, Northern Ireland, etc might take longer, and cost more than indicated in the listings description. Parcels lighter than 10kg are charged as indicated in the 'Postage and payments' section.

** Usually it takes 3-5 working days to deliver our goods to the EU and US, however on rare occasions it may be longer due to unexpected handling delays, or events occurred during the delivery as this is out of our control. Therefore please allow 8 more working days to get your parcel before you reach out to us.

Buyers who live outside of Great Britain (England, Scotland, Wales), please note that you will face customs duties and taxes when the parcel arrives in your country (including Northern Ireland). As a buyer you are responsible for paying any custom duties, and taxes imposed by your government. We are not responsible for customs duties in the buyer's country, and we are not able to pay it. Please take this into account when making a purchase with us.

For any order which shipping cost cannot be calculated at the time of checkout, we will calculate the shipping cost after the order is placed. We will then contact you via eBay messaging system, and ask you to pay the balance between the real shipping cost and the charge you have already paid.

'We offer 1 year manufacturer's warranty service for all of our customers and for all welders available in our offer. This does not apply to welding equipment like tig torches, its consumables, foot pedal controllers, electrodes etc, only to the welding devices. The warranty covers internal parts like circuit board for example, it does not cover welders cover, dial, knobs, plastic feet, as well as any external accessories like TIG torch, its components and consumables, ground wire with clamp etc. The manufacturer's warranty covers repair only, the shipping costs and any further costs that might appear due to shipping the device to the manufacturer based in the EU and from the EU back to the UK like customs duties, and any taxes are on the buyer's side. We offer help in obtaining spare internal parts (like circuit board) from the manufacturer as free replacements during the warranty period. When the warranty expires we offer spare parts at very decent prices.