For Mercedes V6 M272 V8 M273 Intake Inlet Manifold Flap Flaps Runner Lever Fix Mercedes Benz V6 M272 and V8 M273 Intake Inlet Manifold Air Flap Runner Lever Repair Fix Kit

Free 1st Class

Postage to UK mainland

Next day

Delivery available

Express international

Shipping available

ABOUT US

X8R Ltd is a British company completely dedicated to providing high quality improved design vehicle components; correcting original manufacturers design faults. We take the common faults associated with a variety of vehicle manufacturer’s parts and re-design and manufacture parts that will not fail again or that will prevent damage to vehicles.

Please note that since Brexit (1st January) customs charges are now applicable on all orders going to the EU and these charges are payable by the buyer. Any orders where customs charges are refused are not guaranteed to be refunded.

SYMPTOMS OF FAULT

Symptoms can include some or all of the below:

Check engine light (CEL) is lit / on with P code P2004, P2005 or P2006 stored in the system.

Engine control module has stored pending codes for intake manifold, air flap or runner control system.

Error messages; tumble flap stuck in activated position, intake manifold runner control stuck closed.

Emissions test failure.

Poor idle, loss of power, delayed acceleration, increased fuel consumption.

To diagnose this fault you can visually inspect the manifold, remove engine covers and inspect intake manifold from above, using a torch you should be able to see down the front of the manifold and see if the lever is damaged.

THE FAULT
snapped manifold leverbroken manifold lever
A plastic lever on the intake manifold snaps which leads to malfunction of the tumble / swirl flaps and causes vehicle faults.

Mercedes-Benz vehicles with the V6 M272 and V8 M273 engines commonly suffer from failure of the intake manifold. These manifolds are fitted with tumble / swirl flaps. The purpose of these is to increase air speed / tumble at low RPM which creates better torque for the motor at low RPM, enhanced fuel economy and reduces emissions. Unfortunately, the design of this mechanism is flawed and commonly fails. Previously necessitating replacement of the complete intake manifold at vast expense. In reality it is only a small part of the manifold that fails due to poor quality construction. On the intake manifold below the secondary air injection pump sits a plastic lever- integral to the manifolds function. As carbon builds up in the inside of the manifold over time this puts more pressure on the air doors / swirl flaps which connect to the lever, this inevitably cracks the plastic lever which is the inferior quality component. This leads to the lever no longer moving the air doors / swirl flaps inside the manifold runners. This is what causes the symptoms noted.

THE SOLUTION
mercedes benz billet aluminium manifold lever replacement fitted
billet aluminium manifold lever

Install our metal replacement lever and restore full function to the intake manifold, avoid the cost of a complete new manifold. An improved design part which won’t fail.

Mercedes-Benz solution to this common fault is to replace the complete intake manifold, not only is this extremely expensive but also a replacement manifold will have the same plastic lever which would just fail again. Our solution allows you to replace just the lever that fails. Our replacement lever is precision machined from high quality billet aluminium, meaning it will never fail like the OEM part. We provide this at a massive saving compared to a complete new manifold which would just fail again. Our part is perfectly machined to fit in the same way as the OEM part and takes moments to exchange once the manifold is removed. Our part will restore full function to the mechanism, check out our videos and instructions. We also include a repair for the vacuum actuator arm in case the original has snapped or the ball joint has worn.

UK stock
Perfectly machined to fit in the same way as the OEM part
Next day delivery available
Improved design parts
Mercedes Benz manifold lever repair kit instructional video

Mercedes Benz V6 M272 and V8 M273 Intake Inlet Manifold Air Flap Runner Lever Repair Installation Instructions - YouTube

Video will open in a new window

Download Instruction Guide
VEHICLES AFFECTED

This information should be used for guidance only, please inspect the intake manifold to ensure the lever is the fault:

Mercedes C 230 2006, 2007 Mercedes C 230 4MATIC Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 230 RWD Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 230 Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes C 250 4MATIC Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 250 RWD Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 250 Sedan 2008, 2009, 2010, 2011

Mercedes C 280 4MATIC Sedan 2006, 2007, 2008, 2009, 2010, 2011, 2012

Mercedes C 280 RWD Sedan 2006, 2007, 2008, 2009, 2010, 2011, 2012

Mercedes C 280 Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes C 300 4MATIC Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 300 RWD Sedan 2008, 2009, 2010, 2011, 2012

Mercedes C 300 Sedan 2008, 2009, 2010, 2011

Mercedes C 350 4MATIC Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes C 350 RWD Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes C 350 Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes CLC 230 2006

Mercedes CLK 350 Convertible 2006, 2007, 2008, 2009

Mercedes CLK 350 Coupe 2006, 2007, 2008, 2009

Mercedes E 280 4MATIC Sedan 2007, 2008, 2009

Mercedes E 280 RWD Sedan 2007, 2008, 2009 Mercedes E 350 4MATIC Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes E 350 4MATIC Wagon 2005, 2006, 2007, 2008, 2009, 2011

Mercedes E 350 Convertible 2011

Mercedes E 350 Coupe 2010, 2011

Mercedes E 350 RWD Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes E 350 RWD Wagon 2005, 2006, 2007, 2008, 2009, 2011

Mercedes E 350 Sedan 2006, 2007, 2008, 2009, 2010, 2011

Mercedes E 350 Wagon 2006

Mercedes GL450 2007 2008

Mercedes GLK 350 2009, 2010, 2011, 2012

Mercedes GLK 350 4MATIC 2009, 2010, 2011, 2012

Mercedes GLK 350 RWD 2009, 2010, 2011, 2012

Mercedes ML 300 2010, 2011

Mercedes ML 350 2009, 2010, 2011

Mercedes ML 350 4MATIC 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes ML 350 RWD 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes ML 450 HYBRID 4MATIC 2010, 2011

Mercedes ML 450 HYBRID RWD 2010, 2011

Mercedes R 280 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes R 300 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes R 350 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes R 350 4MATIC 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes R 350 RWD 2005, 2006, 2007, 2008, 2009, 2010, 2011

Mercedes S 400 HYBRID Sedan 2010, 2011, 2012

Mercedes SLK 280 Convertible 2006, 2007, 2008, 2009, 2010, 2011

Mercedes SLK 300 Convertible 2006, 2007, 2008, 2009, 2010, 2011

Mercedes SLK 350 Convertible 2005, 2006, 2007, 2008

Mercedes-Benz V6 M272 and V8 M273 engines only.



Associated part numbers:

2721402401, 2721402201, 14433043001, 2721402401, 2721402401, 2721402201, 2721402201, 2721402101, 2731400701, 2721412280, 2721412080, 2721412380, 2721412180, A2721402401, A2721402101, A2721402201, A2731400701, A2721412280, A2721412080, A2721412380, A2721412180.

YOU WILL RECEIVE
Mercedes benz manifold lever kit

1x Billet aluminium CNC machined lever
2x Linkage arms
1x Actuator arm repair

New Banner
RELATED PRODUCTS
Mercedes Benz Door Lock Springs Mercedes Benz Door Lock Springs
Mercedes Benz Air Suspension Repair Mercedes Benz Air Suspension Repair
pinch weld jack pad adaptor Vehicle Jacking Pad Adaptor