Fits Ford Fiesta Mk6 ST150 Vibra Technics Torque Link - Fast Road FOR620M

The following product is suitable for: Ford Fiesta Mk6 ST150

The position of all mountings is described as it would be from the driver�s seat. For example, Left Hand mounts are on the Gearbox / passenger side of a Right Hand Drive car.

Part Number: FOR620M
Location and Type of Mount: Torque Link - Fast Road

Fitment Notes: The standard torque link allows too much engine movement under performance driving conditions therefore we have developed this billet aluminium item fitted with uprated rubber bushes. The bushes are designed to reduce the movement at the link from +/-10mm to +/-2mm. This will result in some increase in noise and vibration in the cabin. But the stress will be reduced on such items as exhaust system, intake system, drive shaft joints and gearchange and the car will have a much 'tighter' feel.

When fitting the link the original support bracket must be removed from the original link and used on this part. Failure to do so could result in damage to the gearbox casing.

To be sure of the correct fitment, please use the further specification data above to assist you. If you are still uncertain please do not hesitate to contact us with either your UK Car Registration or Chassis Number and we will gladly help you identify the correct parts needed prior to ordering.

We ship Vibra Technics products to locations all over the world. Please contact us for a shipping quote if your country is not in the list.

Vibra-Technics Mounts are a completely re-engineered Solution

They are not hard versions of standard parts but a completely re-engineered solution, giving improved durability and handling for both road cars and competition cars requiring rubber bushed suspension.

Vibratechnics Uprated Engine Mounts

Vibra-Technics products are designed specifically for high performance applications where a direct replacement for the standard mount is required along with a much higher level of engine control to cope with higher engine outputs and higher road inputs caused by fast driving. The Fast Road mounts give significant improvements in ride and handling without adversely affecting vibration isolation. The competition mounts can also eliminate clearance problems with strut braces, exhaust systems, body panels etc. They improve handling whilst still giving vibration isolation at high engine speeds. Competition mounts are not recommended for road use.

Vibra-Technics Uprated Suspension Bushes

Vibra-Technics have developed a small range of suspension bushes which are designed to significantly reduce the suspension geometry changes resulting from acceleration, braking and cornering forces. This gives improvements in the car stability and cornering "feel" without limiting normal suspension travel.

We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop.

C & R Enterprises
The Volkswagen, Audi, Seat and Skoda Specialists

Since 1988 we have been repairing, modifying and selling parts for VAG Group cars
Technical Advisors to "Golf+" magazine for over 10 years
Largest contributor to "vwaudiforum.co.uk"
With our experience we can guide you to the right part for your car
We can problem solve and repair your vehicle in our workshops