Fits Ford Fiesta Mk6 ST150 Vibra Technics Full Road Kit
Further down the listing is a diagram to show the fitment location for the contents of the kit on the car to assist you.
The following product is suitable for the: Ford Fiesta Mk6 ST150
This Kit is for Road use, please check our listings for a Race mount kit.
The position of all mountings is described as it would be from the drivers seat. For example, Left Hand mounts are on the Gearbox / passenger side of a Right Hand Drive car.
The Kit contains the following items:
- Transmission Mount FOR610M. (Quantity 1) OEM Part Number(s): 5S617M121AA 2S617M121BB. The standard gearbox mount allows significant engine movement which affects gear shifting, handling and general performance of the car. This mount reduces movement down to a minimum resulting in better gear selection, reduced driveshaft stresses, better handling and dramatically improved feedback to the driver. It is an essential fit for any high performance ST150.
- RH Engine Mount FOR600M. (Quantity 1) OEM Part Number(s): 5S616F012CB 1343438. This mount replaces the OEM engine side mount. The original mount is prone to splitting and gives excessive movement under load. This mount is a direct replacement for the factory mount and requires no modifications to fit. It significantly reduces movement without compromising vibration isolation performance. It is ideal for high performance road use and track day cars, or just as an economic replacement for the OEM part in a standard ST150.
- Torque Link FOR620M. (Quantity 1). The standard torque link allows too much engine movement under performance driving conditions therefore we have developed this billet aluminium item fitted with uprated rubber bushes. The bushes are designed to reduce the movement at the link from +/-10mm to +/-2mm. This will result in some increase in noise and vibration in the cabin. But the stress will be reduced on such items as exhaust system, intake system, drive shaft joints and gearchange and the car will have a much 'tighter' feel.
When fitting the link the original support bracket must be removed from the original link and used on this part. Failure to do so could result in damage to the gearbox casing.
To be sure of the correct fitment, please use the further specification data above to assist you. If you are still uncertain please do not hesitate to contact us with either your UK Car Registration or Chassis Number and we will gladly help you identify the correct parts needed prior to ordering.
The location of some, if not all the Mounts in this kit may be found in the diagram(s) below.
They are not hard versions of standard parts but a completely re-engineered solution, giving improved durability and handling for both road cars and competition cars requiring rubber bushed suspension.
Vibra-Technics products are designed specifically for high performance applications where a direct replacement for the standard mount is required along with a much higher level of engine control to cope with higher engine outputs and higher road inputs caused by fast driving. The Fast Road mounts give significant improvements in ride and handling without adversely affecting vibration isolation. The competition mounts can also eliminate clearance problems with strut braces, exhaust systems, body panels etc. They improve handling whilst still giving vibration isolation at high engine speeds.
Competition mounts are not recommended for road use.
Vibra-Technics have developed a small range of suspension bushes which are designed to significantly reduce the suspension geometry changes resulting from acceleration, braking and cornering forces. This gives improvements in the car stability and cornering "feel" without limiting normal suspension travel.
C&R sell an extensive range of replacement and High Performance parts for your VW, Audi, Seat and Skoda. Stocking only the Highest Quality brands such as: K&N, Black Diamond, Goodridge, Piper, Kent, Jetex, Superpro, Powerflex, Prothane, Vibra Technics, Redline, Eibach, Koni and Weitec.We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop.
C&R Enterprises
The Volkswagen, Audi, Seat and Skoda Specialists
Since 1988 we have been repairing, modifying and selling parts for VAG Group cars
Technical Advisors to "Golf+" magazine for over 15 years
Largest contributor to "vwaudiforum.co.uk"
With our experience we can guide you to the right part for your car
We can problem solve and repair your vehicle in our workshops