Fits Ford Fiesta Mk2 XR2 CVH Vibra Technics Full Road Kit

Further down the listing is a diagram to show the fitment location for the contents of the kit on the car to assist you.

The following product is suitable for the: Ford Fiesta Mk2 XR2 CVH

This Kit is for Road use, please check our listings for a Race mount kit.

The position of all mountings is described as it would be from the drivers seat. For example, Left Hand mounts are on the Gearbox / passenger side of a Right Hand Drive car.

The Kit contains the following items:
- Transmission Mount FOR62M. (Quantity 2). Overrun and accelaration forces are virtually all reacted on these 2 mounts in the Fiesta and Escort. For "normal" driving the standard mounts give a good compromise between controlling engine movement and isolating noise and vibration. With a tuned engine and/or "hard" driving the engine movement will lead to difficult gearchanges, jerky take off and at each gearchange, increased fatigue of exhaust system and other ancilliaries.In worse cases the engine unit will hit strut braces or other equipment in the engine bay. By using the Vibra-Technics FOR62M you will generally eliminate all these problems and give the car a 'tighter' feel.

- RH Engine Mount FOR81M. (Quantity 1) OEM Part Number(s): 84FB6038CD 1640021. Fiesta Mk2 CVH and Escort '86-'88. Check the part number on your original mount before ordering. Replaces Ford mount 84FB 6038 CD (1640021).

To be sure of the correct fitment, please use the further specification data above to assist you. If you are still uncertain please do not hesitate to contact us with either your UK Car Registration or Chassis Number and we will gladly help you identify the correct parts needed prior to ordering.

The location of some, if not all the Mounts in this kit may be found in the diagram(s) below.

Vibra-Technics Mounts are a completely re-engineered Solution

They are not hard versions of standard parts but a completely re-engineered solution, giving improved durability and handling for both road cars and competition cars requiring rubber bushed suspension.

Vibratechnics Uprated Engine Mounts

Vibra-Technics products are designed specifically for high performance applications where a direct replacement for the standard mount is required along with a much higher level of engine control to cope with higher engine outputs and higher road inputs caused by fast driving. The Fast Road mounts give significant improvements in ride and handling without adversely affecting vibration isolation. The competition mounts can also eliminate clearance problems with strut braces, exhaust systems, body panels etc. They improve handling whilst still giving vibration isolation at high engine speeds.
Competition mounts are not recommended for road use.

Vibra-Technics Uprated Suspension Bushes

Vibra-Technics have developed a small range of suspension bushes which are designed to significantly reduce the suspension geometry changes resulting from acceleration, braking and cornering forces. This gives improvements in the car stability and cornering "feel" without limiting normal suspension travel.

We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop.

C&R Enterprises
The Volkswagen, Audi, Seat and Skoda Specialists

Since 1988 we have been repairing, modifying and selling parts for VAG Group cars
Technical Advisors to "Golf+" magazine for over 15 years
Largest contributor to "vwaudiforum.co.uk"
With our experience we can guide you to the right part for your car
We can problem solve and repair your vehicle in our workshops