200 GPD RO membrane 

RO membrane elements is designed and manufactured by well-know water company for household drinking water. it is some of most reliable and consistent products in the industry. 

The Brand may vary, but maintain same quality.

Advanced membrane technology coupled with well-controlled element rolling allows Ospura to produce RO membrane Elements with stable performance. Ospura elements are uniquely engineered for their high level of slt rejection with minimum compromise in water flux. the elements have been certified by NSF.

Features:

   - Innovative membrane design

  - Dry RO membrane

   - Less fouling and More consistent

   - Polyamide Thin-Film Composite

   - Reduce energy use

   - Lower consumption of chemical and longer life

TFC-3012-200 RO Membrane Specification (See table below for details)

   - Water Yield: 200 gpd

   - Salt Rejection: 96%

 

Operation Ratings

   - Max. Operating Pressure: 300 psi (21 bar)

   - Max. Operating Temperature: 45 C (113 F)

   - Operating PH Range: 2 - 11

   - Max. SDI (15min): 5

   - Free Chlorine Tolerance: < 0.1 ppm


ModelTFC - 3012 -200TFC - 3012 - 300 TFC - 3013 - 400RT - 3020HF
Photo
PerformanceStable Desalination %97979797
Min. Desalination %95959595
Mean Permeable Flow GDP (L/d)200 (760)300 (1135)400 (1512)600 (2280)
Active Film Area ft2(m2)10 (1.0)14 (1.4)16 (1.92)26 (2.4)
Test ConditionsPressure

65psi

(0.45Mpa)

150psi

(1.03Mpa)

Water Temp.25℃25℃
Concentration(NaCl)500ppm500ppm
Water PH6.5 to 7.56.5 to 7.5
Recovery Rate %1515
Operating ConditionsMax. Operating Pressure

300psi

(2.07Mpa)

500psi

(3.45Mpa)

Max. Feed Water Temp.45℃45℃
Max. Feed Water Silt Density Index (SDI)55
Feed Water Chlorine Tolerance< 0.1ppm< 0.1ppm
Feed Water PH Range, Continuous Operation3 to 103 to 10
Feed Water PH Range, Short-Term Cleaning2 to 122 to 12
Max. Pressure Drop of Single Membrane

10psi

(0.07Mpa)

10psi

(0.07Mpa)