Only for heating
ITC-306T is a pre-wired heating output temperature controller(No Cooling Controller) with time function specifically for breeding and planting. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. ITC-306T can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Bullet Points:
Temperature Control Mode: On/Off Control. Please note there is only one relay which is heating relay. Both of the plugs can control the heating. But totally could not over 2300W.
Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
Maximum output load: 2300W(230V). Temperature calibration; Over-temperature and sensor fault alarm
Dual display window, be able to display measured temperature and set temperature at the same time;
Plug and play design, easy to use; Support reading with Centigrade or Fahrenheit unit
Features:
Temperature Control Range: -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Input Power : 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
Storage: Temperature -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Inlcuded:
1 x ITC-306T Controller (EU PLUG)
1 x Manual
Only for heating
ITC-306T is a pre-wired heating output temperature controller(No Cooling Controller) with time function specifically for breeding and planting. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. ITC-306T can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Bullet Points:
Temperature Control Mode: On/Off Control. Please note there is only one relay which is heating relay. Both of the plugs can control the heating. But totally could not over 2300W.
Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
Maximum output load: 2300W(230V). Temperature calibration; Over-temperature and sensor fault alarm
Dual display window, be able to display measured temperature and set temperature at the same time;
Plug and play design, easy to use; Support reading with Centigrade or Fahrenheit unit
Features:
Temperature Control Range: -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Input Power : 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
Storage: Temperature -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Inlcuded:
1 x ITC-306T Controller (EU PLUG)
1 x Manual