This kit contains
65% Silver "650 Extra Easy" Brazing Wire. Three (3) ft of Round 20 GA wire (0.032" Dia).
PLUS more than
1/2 ml of Stay-Silv(r) Flux in a handy 1 ml applicator syringe
Please See Manufacturer's Safety Warning Below for Flux
Solder Wire is Braze 650 Alloy (non-toxic)
Silver 65.0% ±1.0%
Copper 20.0% ± 1.0%
Zinc 15.0% ± 2.0%
Solidus/Liquidus (Range of melting)
670/720 C
1238/1328 F
Shipping is from USA first class package.
Other (priority) shipping arrangements are available if desired
There are longer coils available - just ask
I also have Round 20 GA 56% easy, 75% hard & 70% medium available.
Also 30% and 45% silver 14 gauge solder wire are in stock
Jewelry : Silver Solder - Brazing wire--------------------------------------------------------------------------------------------------------------------------------------------------------------
Harris Stay-Silv(r) White Brazing Flux
Danger: Before use, read
MSDS PN SSWF1 EDP No. 40023
For brazing stainless steel, monel nickel, copper, brass, bronze and other ferrous and non-ferrous metals and alloys. Use with Stay-Silv(r), Safety-Silv(r) and other brazing filler metals. Chemically active from 800 to 1600 F, extremely fluid, will penetrate the tightest joints. Not subject to recrystallization (lumpiness-hardening). Meets Fed. Spec. OF499 (Type B), AWS FB3A, AMS 3410. May be water thinned. Remove all flux residue on completion of brazing.
Keep out of reach of Children
The Harris Products Group, Mason, Ohio 45040
U.S.A.
Made in Mexico
Warning Contains Fluorides. Protect yourself and others. Read and understand this information. FUMES AND GASES CAN BE HAZARDOUS TO YOUR HEALTH. BURNS EYES AND SKIN ON CONTACT. CAN BE FATAL IF SWALLOWED.
Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS) and your Employer’s safety practices. Keep your head out of the fumes. Use enough ventilation, exhaust at the flame or both, to keep fumes and gases from your breathing zone and the general area. Avoid contact with the eyes and do not take internally. Keep out of reach of children. See American National Standard Z49.1, “Safety in Welding, Cutting and Allied Processes”, published by the American Welding Society, 550 N.W. Lejeune Rd. Miami, Florida 33126; OSHA Safety and Health Standards 29 CFR 1910, available from the U.S. Government Printing Office, Pittsburgh, PA 15250
First Aid: If contact in eyes, flush with clean water for at least 15 minutes. If swallowed, call physician Immediately! Do not induce vomiting unless directed by medical personnel. Rinse mouth with water if person is Conscious. Never give fluids or induce vomiting if the person is unconscious, having convulsions, or not breathing. A Material Safety Data Sheet (MSDS) for this product is attached. The MSDS contains detailed safety and health Information about possible hazards associated with the use of this product. Additional MSDS are available from your Employer or by contacting The Harris Group, Mason, OH 45040.