CAPACITOR CLEARANCE - Reduced to clear - Typically retails at around £40 to £45 each

1 pce Kendeil 1500uF 350VDC K01 63 x 105 (K01350152) Aluminium Electroltic Capacitor +/-20%

As per picture.

Designed for professional power electronics. Switch mode power supplies, converters, filtering devices.

K01 TYPE -40°C +85°C 15000H 

Surge-proof capacitor in aluminium can with insulation sleeve. 
Poles brought out to heavy duty screw terminals. 
Very high CV for unit volume with low ESR and impedance. 
High ripple current capability. 
Extended temperature range. 
High level realiability with outstanding high frequency characteristics

These are new capacitors as supplied direct from manufactuer

63mm Dia x 105mmH

Clearance of excess manufacturing stock


Note: As these capacitors have been sat in stock for a few years it is recommended that they are put through a re-age cycle prior to use as described below. This is standard practice for electrolytic capacitors that have been in storage:

Re-age (Reforming) Procedure Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever is greater) is suggested.