• Features:
    • It can be used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.
    • Equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch.
    • 10 mm to 14 mm bias tape can be used.
    • It Can process flash fabric side, and modify by using cloth tape.
    • Help you make trim width of less than 7mm edge easily.
    • You can use a straight stitch, zigzag stitch or decorative stitch.
    • Fit for these sewing machine models:XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000.
     
  • Domestic Sewing Machine Snap-on Bias Tape Binder Foot For Janome Brother Singer

    Features:

    • It can be used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.
    • Equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch.
    • 10 mm to 14 mm bias tape can be used.
    • It Can process flash fabric side, and modify by using cloth tape.
    • Help you make trim width of less than 7mm edge easily.
    • You can use a straight stitch, zigzag stitch or decorative stitch.
    • Fit for these sewing machine models:XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000.

     

    Specifications:

    • Color:Sliver
    • Material: Stainless Steel
    • Size:35mm*15mm(1.38"*0.59")(L*W)
    •  

    Package List:

    • 1 x Bias Binder Tape Binding Foot
    • Usage Instructions:
    • 1. Before installing the presser foot, turn the trim strip inserted into the guide groove of the presser foot, trim selvage ensure alignment of the presser foot guide groove;
    • 2. Pull the trim strip from the rear of the presser foot;
    • 3. Install the presser foot;
    • 4. Adjust the needle position, until the needle point is located at the edge trim.
    • Tip: If you can not adjust the needle to the appropriate location on the trim, you can loosen the presser foot screw and move around to adjust the position of the guide groove.

    Item Specifics
    Brand :Unbranded
    MPN :Does Not Apply
    UPC :682698864531
    Color :Sliver
    Material :Stainless Steel
    Size :35mm*15mm(1.38"*0.59")(L*W)
    Feature :ESCP

    Payment

    Payment:

    • We accept PayPal only. 
    • All major credit cards are accepted through secure payment processor PayPal.
    • Payment must be received within 7 business days of auction closing.
    • If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    Shipping

    Shipping:

    • We Ship to Worldwide, but we do not ship to APO/FPO.
    • We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
    • Item will be sent out by Air mail within 24-48 hours after cleared payment (excluding weekend & holiday).
    • Arrival time (estimated):
      - United States / United Kingdom / Australia / Canada: 14-21 working days (18-29 days)
      - Germany / France / Spain / Eastern Europe: 18-25 working days (24-35 days)
      - Other countries: 25-35 working days (35-49 days)
    • Shipping time is only estimated and not guaranteed. If not get item after 60 days, please contact us for solving.
    • For bulk purchases weight over 2kg, we may offer EXPRESS way.
    Returns

    Returns:

    • All sales are considered final.
    • If merchandise you found defective or damaged in the long transit, please contact us freely. We will solve your problem ASAP.
    • Defective items will be offered exchange, in condition that, it is returned within 7days upon receiving.
    • If other reason, you want to ship it back to us, you will be responsible for the returning shipping fee and we will send the replacement after receiving the returned item.
    Customer Services

    Customer Services:

    • All buyers are responsible for Customs duties/VAT (value added tax) in their own respective country, if there is any.
    • We will leave POSITIVE FEEDBACK after your payment cleared. Please contact us if you are not satisfied with the item after receiving it.
    • All emails will be answered within 1-2 business day. If you do not receive our reply, please kindly re-send your email/message and we will reply you as soon as possible.
    • Serious Buyer Only! Please place bid only if you agree with all the terms.
     
    Ending Soon!!!
    Domestic Sewing Machine Snap-on Bias Tape Binder Foot For Janome Brother Singer

    Features:

    • It can be used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.
    • Equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch.
    • 10 mm to 14 mm bias tape can be used.
    • It Can process flash fabric side, and modify by using cloth tape.
    • Help you make trim width of less than 7mm edge easily.
    • You can use a straight stitch, zigzag stitch or decorative stitch.
    • Fit for these sewing machine models:XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000.

     

    Specifications:

    • Color:Sliver
    • Material: Stainless Steel
    • Size:35mm*15mm(1.38"*0.59")(L*W)
    •  

    Package List:

    • 1 x Bias Binder Tape Binding Foot
    • Usage Instructions:
    • 1. Before installing the presser foot, turn the trim strip inserted into the guide groove of the presser foot, trim selvage ensure alignment of the presser foot guide groove;
    • 2. Pull the trim strip from the rear of the presser foot;
    • 3. Install the presser foot;
    • 4. Adjust the needle position, until the needle point is located at the edge trim.
    • Tip: If you can not adjust the needle to the appropriate location on the trim, you can loosen the presser foot screw and move around to adjust the position of the guide groove.
    Item Specifics
    Brand :Unbranded
    MPN :Does Not Apply
    UPC :682698864531
    Color :Sliver
    Material :Stainless Steel
    Size :35mm*15mm(1.38"*0.59")(L*W)
    Feature :ESCP

    Payment

    Payment:

    • We accept PayPal only. 
    • All major credit cards are accepted through secure payment processor PayPal.
    • Payment must be received within 7 business days of auction closing.
    • If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    Shipping

    Shipping:

    • We Ship to Worldwide, but we do not ship to APO/FPO.
    • We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
    • Item will be sent out by Air mail within 24-48 hours after cleared payment (excluding weekend & holiday).
    • Arrival time (estimated):
      - United States / United Kingdom / Australia / Canada: 14-21 working days (18-29 days)
      - Germany / France / Spain / Eastern Europe: 18-25 working days (24-35 days)
      - Other countries: 25-35 working days (35-49 days)
    • Shipping time is only estimated and not guaranteed. If not get item after 60 days, please contact us for solving.
    • For bulk purchases weight over 2kg, we may offer EXPRESS way.
    Returns

    Returns:

    • All sales are considered final.
    • If merchandise you found defective or damaged in the long transit, please contact us freely. We will solve your problem ASAP.
    • Defective items will be offered exchange, in condition that, it is returned within 7days upon receiving.
    • If other reason, you want to ship it back to us, you will be responsible for the returning shipping fee and we will send the replacement after receiving the returned item.
    Customer Services

    Customer Services:

    • All buyers are responsible for Customs duties/VAT (value added tax) in their own respective country, if there is any.
    • We will leave POSITIVE FEEDBACK after your payment cleared. Please contact us if you are not satisfied with the item after receiving it.
    • All emails will be answered within 1-2 business day. If you do not receive our reply, please kindly re-send your email/message and we will reply you as soon as possible.
    • Serious Buyer Only! Please place bid only if you agree with all the terms.
     

    DataCaciques