You will need to have at least one working key either black key or another remote key

It will not work if you have service grey key contact us if you only have grey service key

Remote Programming Steps - Do it yourself

3 Easy steps to do it yourself 

1- Program remote once received (Central locking will work now)

2- Take key to locksmith shop and get them to cut your key to code

3-Program transponder chip (this will now start car)

Remote Programming Procedure - Do it yourself

1.       Open Driver side door

2.       Put the Original key in and out of ignition 2 times

3.       Close and open driver door 2 times

4.       Put Original Key in and out of ignition once

5.       Shut and open door twice

6.       Close door

7.       Insert key Turn ignition on

8.       Turn ignition off and remove key

9.       Door locks will cycle

10.   Press lock and unlock together for 1 second then lock button

(To delete remotes turn the key on and off 5 times, door locks will cycle 5 times. Turn the key on then off. Open shut door)

11.   Locks will cycle put key in ignition turn to on then off

12.   Remove key from ignition, close door and test remote

Transponder chip programming do it yourself

1.      Put Original master key in and out of ignition 5 times. Finish with key in ignition

2.       Open and shut door 6 times

3.       Remove original, insert new key

4.       Leave for 60 seconds (or till Security light goes out on dashboard)

5.       After 60 seconds security light stops flashing then you can start car.

6.       Take key out

7.       Open and shut door