1 Specifications
1.1 Output: Continuous 100A, Burst 120A up to 10 seconds.
1.2 Input Voltage: 2-6 cell lithium battery or 5-18 cell NiCd/NiMh battery.
1.3 BEC:
FlyFun-100A: 3A / 5V switching mode BEC.
(FlyFun-100A-OPTO: No on-board BEC.)
1.4 Refresh rate of throttle signal: 50Hz to 432Hz.
1.5 Max Speed: 210000rpm for 2 Pole BLM, 70000rpm for 6 pole BLM, 35000rpm for 12 pole BLM.
(BLM = Brushless Motor)
1.6 Size:
FlyFun-100A: 83mm*31mm*16mm.
(FlyFun-100A-OPTO: 83mm*31mm*14mm)
1.7 Weight:
FlyFun-100A: 76.2g.
(FlyFun-100A-OPTO: 73g)
2 Features
2.1 Safety arming feature: Regardless of the throttle stick position, the motor will not spin after battery is connected.
2.2 Throttle calibration function: Throttle range can be calibrated to be compatible with different transmitters.
2.3 User programmable.
2.4 Multiple program methods supported: transmitter stick, LED Program Card. ESC is very easy to program at home or at the flying field.
2.5 Compatible with LiPo battery and NiCd/NiMH battery.
2.6 Internal timing can be changed to be suitable for different brushless motors.
2.7 Full protection: Low voltage cutoff protection / Over-heating protection / Throttle signal loss protection.
2.8 Extremely low resistance PCB is used at the power output section giving the ESC super current endurance capability.
2.9 Microprocessor uses a separate voltage regulator IC, with great anti-jamming capability.