MAX GPE A/B WHITE
(1.5 GALLONS COMBINED VOLUME)
1-Gallon of MAX GPE WHITE PART A
AND
1/2-Gallon MAX GPE PART B
Please review the instructions before using this product. As with any color coating application, some understanding of painting and coating applications must be observed.
The substrate to be coated must be well prepared prior to applying the MAX GPE A/B WHITE epoxy resins.
PRODUCT DESCRIPTION
Upon cure, MAX GPE WHITE A/B demonstrates color opacity, excellent chemical resistance, structural adhesion and overall durability suitable for many protective coatings applications.
MAX GPE WHITE A/B performs well at room temperature use and can withstand cyclic exposure to temperatures from -40°C to 112°C with minimal loss of mechanical performance. MAX GPE WHITE A/B can be used as an impregnating or fiberglassing resin, tooling and mold gel coats, surface-transfer gel coating, waterproofing coating, or as an opaque white casting resin.
Upon Cure, MAX GPE WHITE A/B resists extreme and repeated thermal shocks making it well suited for bonding substrates with dissimilar expansion coefficients. MAX GPE WHITE A/B and all of our epoxy formulations are 100% solids and do not contain non-reactive plasticizers or solvent fillers.
Buyer Feedback For MAX GPE A/B WHITE
scottm1004 ( 85
nice stuff-looks like glass
byanspoon2000 ( 349)
This is a great product and it ships quickly and packed well!
123ingenuity ( 15)
A hard waterproof glossy white epoxy paint.
Amazing stuff. Waited a while to get it. But worth it. would buy from again(AAAAA+)
THIS KIT INCLUDES A SET OF YORKER CAPS FOR CONTROLLED DISPENSING.
Use these Yorker caps to dispense the material with ease and minimize over pouring and reduce spills.
When done, just replace the tip cap and it will exclude ambient moisture and air and keep the resin system viable for years.
To use the caps, cut off the tip to the desired hole size, and attach. Do not cut pass the ridge-line that keeps the tip cap in place.
To dispense, lay the plastic jug unto its side and apply pressure on the bottle to dispense the contents.
When done replace the tip cap and the container is sealed and it will be usable for years.
We highly recommend using a scale to measure each component accurately.
MAX GPE WHITE FOR GEL COAT APPLICATION
Bonds Directly To OEM Polyester Gel Coat
A Clear Coat Similarly Used In Automotive Finishing Is Required As A
UV Protective Top Coat To Prevent Sunlight Damage And Discoloration.
Mixing Procedure
Video will open in a new window
Episode No. 1 of "Pretty Perfect" - Boat Restoration and Reconstruction of a 29 Ft Cabin Cruiser - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
Pretty Perfect 6, The Redesign and Reconstruction of 29 Foot Boat - YouTube
MAX GPE WHITE For Fiberglass Impregnating Structural Panels
MAX GPE WHITE
MDF Plywood Coating
PROPER MIXING TECHNIQUE
How To Mix Epoxy Resin For Food Contact Coating. Avoid Tacky Spots, Minimize Air Bubble When Mixing - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
MAX GPE WHITE A/B 1.5 Gallon Kit | |
MAX GPE BLACK A/B 1.5 Gallon Kit | |
MAX GPE RED A/B 1.5 Gallon Kit | |
MAX GPE YELLOW A/B 1.5 Gallon Kit | |
MAX GPE BLUE A/B 1.5 Gallon Kit |
|
Viscosity |
900-1100 cPs Mixed |
|
Mix Ratio |
100 parts A to 50 parts B by weight or volume |
|
Working Time |
65 Minutes at 200 Gram Mass |
|
Peak Exotherm |
130°C 200 Gran Mass |
|
Time To |
80 Minutes |
|
Density |
1.10 g/cc Cured |
|
Full Cure Time |
24 to 36 Hours at 25°C |
|
Heat Cure |
2 Hours @ 25°C Plus 1 Hour @ 120°C |
|
Set-To-Dry @ 10 Mil Film |
4 Hours |
|
Surface Dry |
9 Hours |
|
Handling Time |
8 Hours |
|
Test Criteria |
|
|
Shore Hardness |
80 D |
|
Izod Impact |
.82 ft-lb/in |
|
Tensile Shear Strength |
3,100 psi |
|
Tensile Strength |
9,600 psi |
|
Tensile Modulus |
400,000 psi |
|
Tensile Elongation |
2.1 % |
|
Compressive Strength |
4500 psi |
|
|
|
|
Deflection Temperature |
84°C |
|
24 Hours Water Weight Gain |
0.3% |
MIXING AND USAGE APPLICATIONS
THE USE OF A WEIGHING SCALE IS HIGHLY RECOMMENDED TO ENSURE PROPER CURE
Purchase this scale with any of our product offering and the shipping cost of the scale is free.
https://www.ebay.com/itm/222630300203
MAX GPE A/B WHITE is an ultra bright titanium white shade and may require tinting to reduce white color brilliance.
Use our MAX EPOXY PIGMENT PASTE or an oil-based tinting colorant to modify the color to a more eye-pleasing color shade.
Recommended Tinting Colorants
MAX COLOR PIGMENT CONCENTRATES
These are color concentrates only and must be dispersed in an epoxy resin or PART A component. The color concentrates are used to blend in with
MAX GPE COLORED EPOXY SYSTEM to attain other colors or to intensify color opacity.
MAX COLOR KIT https://www.ebay.com/itm/311946633043
MAX COLOR KIT https://www.ebay.com/itm/
Common White Shades Used For Marine Gel Coats Modified With
MAX EPOXY PIGMENT PASTE
****************************************************************
PLEASE CHECK OUT OTHER AVAILABLE
RESIN SYSTEMS AT OUR eBay STORE For our complete listing, please Visit our eBay store!
DON'T FORGET OUR EPOXY MIXING KIT
Click The Link To Add To Order https://www.ebay.com/itm/222623932456
EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY
Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. It must withstand the tenacity of the chemical and must be free of contamination. Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature.
MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Foam Brush
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.
The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.
There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
****************************************************************
PLEASE CHECK OUT OTHER AVAILABLE
DON'T FORGET OUR EPOXY MIXING KIT
Click The Link To Add To Order https://www.ebay.com/itm/222623932456
EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY
1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Foam Brush
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.
The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.
There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.