1/2/5PCS MPR121 Breakout V12 Capacitive Touch Sensor Control Module I2C keyboard
Product Image:
Product Description:
Features:
 
This is a breakout board for Freescale's MPR121QR2.
The MPR121 is a capacitive touch sensor controller driven by an I2C interface.
The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode.
The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes,
they may be used to drive LEDs.
There a four jumpers on the bottom of the board, all of which are set (closed) by default.
An address jumper ties the ADD pin to ground,
meaning the default I2C address of the chip will be 0x5A.
If you need to change the address of the chip (by shorting ADD to a different pin),
make sure you open the jumper first. Jumpers also connect SDA,
SCL and the interrupt pin to 10k pull-up resistors.
If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC.
The VREG pin is connected through a 0.1uF capacitor to ground, which means,
unless you modify the board, you can't operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).
Size:3cm x 2cm .
 
Package Include:
 
1/2/5 x New MPR121 Breakout V12 Capacitive Touch Sensor Controller Module I2C keyboard

We appreciate your feedback very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative feedback. Thank you in advance

 

1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem.

2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer.

3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.

1.Normmly we will send the goods within 1-3 working days after your payment is verified .

2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo and let the delivery men confirm it. Then we will help you let the shipping company compensate you.

On Sep-16-17 at 19:03:33 PDT, seller added the following information:

DataCaciques