Shipping
Only the USA buyer will be shipped from USA.The pre-order time is about 55-65 working days；
Japan/South Korea/Thailand will be sent via DHL/Fedex,the shipping time is about 5-7 working days;
The other countries will be sent from China via Ocean shipping,the shipping time is about 40-60 working days,if you can't wait ,please don't purchase it.
Standard Specification
1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting
2. USB Interface
3. Air Assist, Remove heat and combustible gases from the cutting surface.
18W Air pump, flow can be 38L/Min.
4. Embedded Exhaust Fan, Easier install, Safer transport.
40W exhaust fan, flow can be 5.27m³\Min.
5. Rotary Axis, Engrave any cylindrical object.
6. Cellular platform, Leave no chippings on working area.
7. Intuitive Control Panel, Set Speed, power and more controls directly from the laser.
8. Water Cooling and Protection System with a chiller.
With jam-proof heat exchanger, water flow detection alarm, over temperature alarm.
9. Laser position.
10. Emergency Stop Buttom.
11. Larger Size, 600*1000mm working area.
12. Lifting platform is electric control, 0-20cm.
13. Drag - and - chain transmission line
14. Laser focal length: 5CM
15. A limit switch let it can only work when the cover is closed.
16. Machine service life: 7200H at least for laser tube, 5-8 years for machine body.
17. From professional China CO2 Laser Engraving machine supplier.
18.Lift gate service not included in price
Parameter
Total power <300W
Laser power maximum value :100W
Laser type :CO2 laser engraving machine
Laser tube working time :7000-10000 hour
Power supply AC :220V
Working area :600*1000 mm
Cutting depth :0-15 mm (different material differ)
Engraving speed :0-500mm/s
Lifting platform :0-200 mm Honeycomb Worktable
Locating precision :<0.02 mm
Min shaping character Character: 2*2mm, Letter: 1*1mm
Working temperature :5℃-45℃
Working humidity :5%-95%
Resolution ratio : ≤1000dpi
Data transfer interface :USB 2.0 (offline)
Cooling :Water Cooling and protection system with chiller
Graphic Format :Supported (BMP,JPEG,PLT,CDR,AI,)TIFF,PCX,DIB,TIF
Work software :CorelDraw/LaserDRW
Color separation :No
Auto-focus :No
Protection :Emergency stop button and Stop working when water broken
Detail picture
Sketch map of Optical system, the laser beam is from laser tube, then reflecting mirrors and focus lens, As following:
Sample and Applicable materials
It is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc., engrave Painted Metals and Anodized aluminum are also OK. Can not work on metal materials. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes, toys and etc.
Standard accessories and Package
1 x 1060 100W C02 Laser engraving machine
1 x Laser engraving software (down load link)
1 x User Manual (down load link)
1 x CW-3000 INDUSTRIAL CHILLER
1 x Air exhaust pipe
1 x Air Pump
1 x Communication cable and USB cable
1 x Rotation axis
1 x Honeycomb work platform
THREE packages：
1.Machine Package:Wooden box with foam inside
Package dimension:154*112*77CM
Gross weight:178KG
Package weight:267KG
2.Chiller Package:Carton box with foam inside
Package dimension:57*48*35CM
Gross weight:12KG
Package weight:20KG
3.80MM 3-JAW ROTATION AXIS Package:Carton box with foam inside
Package dimension:83*38*31CM
Package dimension:83*38*31CM
Package weight:15KG
How it works.....
STEP 1
Answer to these questions.
What type of business do you have?
What purpose and material to make with?
What's your expectation?
A sketch or a sample if you have
STEP 2
Place an order and make a payment through PayPal.
STEP 3
We make a sample and take video to show artwork physically.
STEP 4
You can tell me how you feel about it. Make some change if any.
STEP 5
Once you are satisfied with final artwork effect, I will send you the machine.
Please note
- After finals Machine will be shipped to you! Return for reasons like “change mind/I don’t like” are not acceptable.
- Return is time/money wasting matter please check everything make sure it must be correct machine for you then purchase.
eBay is safe market place to trade. eBay&seller’s extreme target is to meet customer requirement with satisfaction. Having defined cleared policy of return& warranty, it would benefit buyer to align knowledge base how extensively they were protected. Industry& Business machine was always heavy consequently shipping cost is higher. As well, it includes all kinds of parts so warranty of them may vary. Attached below it was some FAQ to learn policy of return& warranty.
1. 1. Q: I am fresh man to the machine. Can I buy it?
A: Machine is always required to setup/install(NOT ready to use). You are suggested to buy only when knowledge base is qualified.
2. Q: I have received my machine but it is too difficult to setup. Can I return it?
A: Yes, return is accepted. Buyer need to pay return shipping charge andbear 25% of purchase value as restocking fee.
3. Q: Do you solve hardware&software issue?
A: The product was tested PASS before shipping. After delivery, we assist you to solve problem. Buyer is responsible for parts replacement.We disclaim computer compatible issue is covered by warranty.
4. Q: I received my machine but box was seriously damaged so machine was heavily damaged. What can I do?
A: If machine was received heavily damage, we will pay for return shipping cost. Please don’t worry.
5. Q: I received my machine but I found tiny deformation on side panel. What can I do?
A: In this case, please check/test whether the machine works in order. If so, we send some gifts in small value. On the other hand, if machine doesn’t work in order, buyer was asked to take a video and we send replacement parts. Buyer is responsible for parts replacement.Return is NOT accepted for such reason. We send some gifts in small value
6. Q: I receive my machine but it doesn’t work in order forparts/accessories are broken. What can I do?
A: I will send parts/accessories for free.Buyer is responsible for parts replacement.Please don’t worry. Return was NOT accepted. We send some gifts in small value
7. Q: I receive my machine but product appearance different to photo in listing(like panel, switch, pump, fan…) can I return it?
A: Manufacturer own the right to change/upgrade the product without notice. If product works in order, return was NOT accepted. We send some gifts in small value . If appearance was concerned, please kindly ask us to take photo before shipping.
8. Q: I receive my machine with a lot of scratches. It is used one. Can I return it?
A: The machine was economicsolution to business. Appearance was not care too much. It is NOT used, just born with a lot of scratches. Return is NOT accepted. If you mind it, please consider it before bidding.
