- Adapter Width: 50mm (2Inch) each side
- Quantity: 4 Pieces
- Bolt Pattern: Convert Hub 6X5.5 (6X139.7) or 6X135 to fit Wheel 5X127
- Center Bore: 108mm to 87mm
- Thread Pitch: 14X1.5
- Adapter Type: Lug Centric / Conversion Adapter
- This adapter set includes open end lug nuts to secure the adapters onto your factory hubs
- This adapter set includes open end lug nuts to secure the adapters onto your factory hubs (Your vehicle may have different thread size than what is supplied with this listing.
- If your factory thread size is different from 14X1.5 -You will need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
On Jan 5, 2024 at 21:09:38 PST, seller added the following information: