This auction is for 1,2,5,10,20,40,50,100 x 50/47 or 100 Ohms melf resistors
 
This is for the Mk4 and Mk5 model GHD's, If your GHD's have resistors R8 and R11 i am supplying 50/47ohm or 100ohms melf resistors. There is loads of guides on YouTube on how to repair dead GHD's. I recommend that you use a multi meter to check the resistors before ordering, And make sure that there is no other faults with your GHD's. 
 
I have been repairs Ghd's with R8/R11 and i use the 47 Ohm Resistor as that is the nearest to match also these are 400mw resistor slightly better rating than the original which are 250mw.

BEWARE NOT TO USE RESISTORS ABOVE 400MW. 
THE RESISTOR BLOWS SO THAT IT DOESN'T PUT THE PRODUCT AT FURTHER RISK DO THE MATHS WITH OHMS LAW.
THE REASON THE RESISTORS BLOWS IS THERE WAS A FAULT OR A MAINS SPIKE.
AND THIS LITTLE RESISTORS PROTECTS THE GHD's FROM FURTHER DAMAGE.
 PLEASE REMEMBER JAMELLA(GHD) WOULD OF FITTED HIGH POWER RESISTOR TO START WITH ASK YOURSELF WHY.
 
If you are unsure please send me a message. Also check my other auction out if you just need single resistors.