AQUA BUILD LIQUID FOIL Waterproof Tanking Membrane
For use before tiling
* Kitchen* Ready-to-use
* Bathroom* Watertight
* Shower* Flexible
* Cellar* For Indoor and Outdoor use
* Wet room * Solvent Free
PRODUCT DESCRIPTION
LIQUID FOIL is a ready-to-use, one-component, flexible sealing compound for waterproofing walls, floors and ceilings, both inside and outside buildings. Widely used in bathrooms, showers and wet rooms, irreplaceable when insulating surfaces under ceramic tiles. It can also be used on terraces, balconies and garages. It is especially useful as insulation for gypsum, plasterboards, plywood or tile backer boards.
LIQUID FOIL is a high quality mixture of polymeric binder, mineral fillers and modifying agents. After drying, the applied layer is impervious to water. Fills hairline cracks in the substrate. It has excellent adhesion to most materials. It reduces the risk of cracks forming in cladding materials as a result of different thermal expansion of the substrate and cladding, eg. ceramic tiles. After drying, it is frost-resistant.
SURFACE PREPARATION AND APPLICATION
Apply to the substrate that is clean, sound and free of dust, dirt, debris and paint remains or grease. Fill cracks and holes. For porous surfaces, such as aerated concrete, it is recommended coat of ACRYLIC PRIMER or DEEP PRIMER PRO in order to reduce the absorbency of the substrate. Strengthen the corners and joints with elastic tape, blending the edges in LIQUID FOIL.
Mix contents thoroughly before use. Next, apply the material onto the prepared substrate using a brush or mason brush, in two layers. Apply the second coat after the previous dries (about 3 hrs.). Fresh plaster and cement floors can be sealed, after at least 28 days from the time the application.
Protect surfaces covered with LIQUID FOIL against mechanical damage and rain until completely dry. Clean tools with water immediately after use.
NOTES
Store the product in closed original packaging. The manufacturer is not liable for misuse of the product or not following instructions on the packaging.
appearance: blue semi-liquid putty,
used and stored at air and ground temperatures of: from 5 to 30°C (also applies to drying),
drying time:
full mechanical strength after 3 days
interval between the application of the last layer and laying tiles min. 24 hours.,
water exposure after 7 days of application.
density: about 1.5 g/cm3,
consumption: 1.1 kg / m2 with a total thickness of 2 layers: 1 mm,
12 months warranty from date of manufacture on the original sealed packaging
Available tub sizes: 1.5 kg, 3kg, 4.5 kg, 7.5 kg, 15 kg