1 x Complete Remote FLIP KEY after market ready for programming You can program this remote yourself - Transponder to be programmed via locksmith 1 x Complete Remote Flip-key ready for programming Includes Battery + Electronics + Transponder chip + Keyblade Comes assembled Suitable for FORD FOCUS 09/2002 TO 05/2005 Two steps to follow 1- Program central locking first  2- Take key to locksmith to cut and program transponder chip to start car Please check with your local locksmith to make sure they have scan tool to program transponder chip most locksmiths can do this

Remote programming procedure

NOTE : A maximum of 4 remotes can be programmed.

1. Switch ignition from position 0 to II then switch ignition from II to I and back to II 4 times within 3 seconds.
2. The PATS LED should be light to indicate programming mode.
3. Switch ignition back to position 0.
4. PRESS the UNLOCK button on the first remote transmitter and keep it pressed until PATS LED flashes 4 times.
5. REPEAT step 4 for all additional remote transmitters within 10 seconds.
6. Switch ignition to position II and back to 0 to complete procedure.
7. Check all remote transmitters for operation.