YJ00217-TAS5630 High Power Digital Amplifier Board (Deluxe Edition)
Specification:
Basic performance parameters:
Working method: Class D Quiescent current: 65mA Work efficiency: 88% Output power: 2*300W/4 ohms 10% THD Frequency response: 20Hz to 20KHz Dynamic range: >100 dB Signal to noise ratio: 100dB (A-Weighted) Working voltage: DC50V PCB size: 140*95MM
product details:
All
parts of this product are original authentic, unpretentious, pure
quality; the use of high-quality original parts, not only the safety and
quality are guaranteed, the service life is long, more important is to
ensure that the actual performance can achieve the design goals.
Adopt original TAS5630, OPA1632DR
The
main filter electrolytic capacitor adopts the nichicon brand name and
the capacity is 470UF/100V*4, which guarantees strong and continuous
power support.
The
resistor uses a five-ring metal resistor, and the main circuit uses a
five-ring metal film resistor with an accuracy of ±1% to ensure a good
signal-to-noise ratio.
Fully shielded high current inductors ensure a crisp and powerful sound.
The
PCB adopts 1.6mm thick double-sided sheet, 2.0 oz copper thickness, and
the whole process of tin-spraying ensures the good passing performance
of the current. First-class PCB quality.
Product Description
The
OPA1632 is a fully differential amplifier designed to drive high
performance audio analog-to-digital converters (ADCs). The highest audio
quality, it offers very low noise and output drivers, this application
is optimized for the design of the OPA1632 Excellent
gain bandwidth of 180MHz 50V/μs and very fast slew rate, resulting in
very low distortion 0.00022%. Very low input noise of 1.3nV/√Hz further
ensures maximum signal-to-noise ratio and dynamic range. Fully
differential The
flexibility of the structure makes it easy to achieve single-ended
fully differential output conversion. Differential output reduces even
harmonics and reduces common mode noise. The OPA1632 provides high
performance ADCs with high performance audio PCM1804. The driver is also
enhanced when used. The
flexibility of this amplifier. TI's TAS5630 is a Class D amplifier with
integrated analog input 300W stereo (total power 600W), capable of
delivering up to 300W stereo from a single supply 50V to a 4 ohm
speaker, with a traditional Class AB amplifier Performance
(<0.03% THD) and Class D amplifier power efficiency. Its SNR is
greater than 100dB, PSRR is 80dB, power stage efficiency is as high as
88%, Texas Instruments TI industry Highest power class D amplifier -
Package:
1x YJ00217-TAS5630 High Power Digital Amplifier Board (Deluxe Edition) High Quality
On Oct-09-18 at 23:07:16 PDT, seller added the following information: