Alpha

ALPHA, new cross fiber helmet of SUOMY , studied in details for internal comfort, technologies, and safety for end user.

  • MaterialsOpen or Close
    Shell in TRICARBOCO material, produced in two sizes (M and L), fabric mix of Kevlar, carbon and fiber joint by resin.
    Internal polystyrene in 3 sizes (S , M and L) to get the best comfort with variable density.

HomologationsOpen or Close
ECE 22-05, DOT, INMETRO NBR 7471

SizesOpen or Close
XS53/546 1/2” - 6 5/8”
S55/566 3/4” – 6 7/8”
M57/587” – 7 1/8”
L59/607 1/4” – 7 3/8”
XL61/627 1/2” – 7 5/8”
XXL63/647 3/4” – 7 7/8”

SAFETY

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head.
If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility.

SHELL
 in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. 

The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact.
Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy.
A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene.

The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw.
After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head.
If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet.
Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs.
To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings».
Use the release tab only to remove the helmet! Never release this tab while riding.


VENTILATION

The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation.


HOMOLOGATIONS

ALPHA is homologated as per the following rules:

ECE 22-05Europe
DOTAmerica and Canada
INMETRO NBR 7471Brasil


You have to refer always to the homologation of the country in which the helmet is sold.



INTERNAL COMFORT

The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.

They are made of a precious fabric with specific fibers, that offer:
  • It moves away the body sweat;
  • Keeps rider fresh, dry and completely comfortable;
  • Lightweight, soft and breathable fabric;
  • Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.


SIZES


SIZESCMINCH
XS53/546 1/2” - 6 5/8”
S55/566 3/4” – 6 7/8”
M57/587” – 7 1/8”
L59/607 1/4” – 7 3/8”
XL61/627 1/2” – 7 5/8”
XXL63/647 3/4” – 7 7/8”

SPARE PARTS

SPARE PARTS DESCRIPTIONCODE
Inner Covered Chin Guard KAAL0M00
 
Top Air VentWhiteKAALTV01
BlackKAALTV02
 
Chin Guard Air VentWhiteKAALVM01
BlackKAALVM02
 
Screw Kit KAALVF00
 
Inner Comfort Liner
removable and washble
Size XSKAAL0I01
Size SKAAL0I02
Size MKAAL0I03
Size LKAAL0I04
Size XLKAAL0I05
Size XXLKAAL0I06
 
Cheek PadsSize XSKAAL0L01
Size SKAAL0L02
Size MKAAL0L03
Size LKAAL0L04
Size XLKAAL0L05
Size XXLKAAL0L06

KYT-STRIKE-EAGLE-ROMAIN-FEBYRE-MX-HELMET-ACU-GOLD-STAMPED-APPROVED-KY-SE-RF
NOTE:

ACU Gold Stickers are only required on helmets sold to within the UK. They are NOT required on helmets outside the UK as they have no meaning elsewhere.
Thank you

TRUSTED UK COMPANY

Unlike some eBay sellers we are a legitimate UK company. Based in North Yorkshire, UK, MRS Limited are an importer of motorcycles & many other products and deals direct with the general public as well as large suppliers & Dealers throughout the UK.

Map.001

Free next day delivery refers to next working day and is subject to cleared payment being received before 2.30pm. Unfortunately shaded areas take 2-3 days to deliver, there is no 24 hour service from our providers.

Deliveries are made Monday to Friday and a signature will be required. It is the responsibility of the buyer to ensure that someone will be at the delivery address on the day of delivery to receive and sign for the goods. For heavy items the courier may require assistance unloading the parcel.

We strongly recommend leaving a mobile number at checkout so that you receive your expected delivery time of your parcel, which will be a 1 hour window.

IN STOCK & READY TO SHOP

All our products are in stock and shipped same-day if the order is placed before 2.30pm. Orders placed over the weekend are despatched on Monday for Tuesday delivery (Bank Holiday's excepted).

100% POSITIVE FEEDBACK

We work relentlessly to deliver a 5 STAR SERVICE to our thousands of customers and are rightfully proud of our 100% positive feedback. On the rare occasion that things don't go to plan, we ALWAYS do everything in our power to put it right - our business is built on happy and loyal customers and we want YOU to be one of them!

30 DAY MONEY BACK GUARANTEE

We offer a 30 day money back guarantee. This means that for the 30 days following your purchase of any item(s) from MRS Limited you can return or exchange your item(s), provided they are unused and in their original packaging.

If for any reason you would like to return an item within 30 days of receiving the delivery you should message our customer service team through eBay to inform them that you wish to return the item

In the event of damaged goods we shall arrange for a carrier to collect the items from you and return them to us (at no cost to yourself)

In all other circumstances you shall be responsible for return postage/courier charges

Please always return your items with a copy or the original invoice. This will speed the process of closing your return.

CONTACT OUR CUSTOMER SERVICE TEAM

Our friendly and knowledgeable customer care teams are here to help. We answer all questions within 24 hours. If you wish to contact the MRS Limited team please use the details provided below:

Contact Us:
Contact us through eBay - email the seller
Our offices are open: Monday-Friday 8:00am to 5:00pm