Fluke T6-1000 Clamp Continuity Current Electrical Tester Clamp Meter FieldSense       New Fluke T6-1000 with integrated FieldSense technology, you can quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads. Features:    5 advantage More safer: Measure voltage to 1000 V ac through the open fork, without test leads. More faster: No need to open covers or remove wire nuts. Be more efficient: Simultaneously measure voltage and current. Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2). Go beyond simple detection. Actually measure ac voltage and current values without test leads.                                                       FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage* Simultaneous voltage and current display – shows all power supply measurements at a glance for efficient trouble shooting 1 to 1000 V ac or dc (T6-1000) 0 to 200 A ac True-rms voltage and current Resistance 1 Ω to 100 kΩ Frequency measurement 45 Hz to 66 Hz Works with wires up to AWG 4/0 (120 mm2) with a 17.8 mm jaw opening HOLD button temporarily freezes the reading for easy viewing Easy to read display with backlight   Tips: FieldSense Technology Do not hold or touch wire you are testing during a measurement. Use the black probe to make the ground connection if: wearing gloves or insulated footwear standing on an insulated ladder additional ground contact is required for the application   FieldSense measurement looks like this when properly grounded: Correct Display Display color turns green Display shows a valid measurement >16 V rather than dashes or 0.0 shows for measurement ≥30 V                                                      Specifications:   Function Requires test leads Range Resolution Accuracy[1] FieldSense ac voltage true-rms No 1000 V 1 V ± (3 % + 3 counts) 45 Hz - 66 Hz[2][3] FieldSense ac current true-rms No 200.0 A 0.1 A ± (3% + 3 counts) 45 Hz - 66 Hz FieldSense frequency (Hz) No 45 Hz – 66 Hz 1 Hz ± (1% + 2 counts)[3] Volts ac true-rms Yes 1000 V 1 V ± (1.5% + 2 counts) 45 Hz - 66 Hz Volts dc Yes 1000 V 1 V ± (1% + 2 counts) Resistance Yes 2000 Ω 1 Ω ± (1% + 2 counts) Yes 20.00 kΩ 0.01 kΩ Yes 100.0 kΩ 0.1 kΩ Safety   1000 V CAT III 600 V CAT IV     Accuracy[1]: ± ( [ % of reading] + [number of least significant digits] ). Accuracy is specified for 1 year after calibration,at 18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are ac-coupled, RMS responding. Accuracy[2]: Add 3 % without an external ground connection. External ground connection required for user wearing insulated gloves, standing on an insulated ladder, or otherwise insulated from earth ground.   Accuracy[3]: FieldSense is specified from 16 V to 100 % of range.   General Specifications Calibration 1-year calibration cycle Dimensions 61.1 x 259.3 x 43.8 mm Jaw opening 17.8 mm Weight 0.35 kg (0.78 lb) Temperature Operating -10 °C to +50 °C (14 °F to 122 °F) Storage -30 °C to +60 °C (-22 °F to +140 °F) Altitude Operating 2,000 m (6,562 feet) Storage 10,000 m (32,808 feet) Relative Humidity 0% to 90%, 5 °C to 30 °C (41 °F to 86 °F) 0% to 75%, 30°C to 40 °C (86 °F to 104 °F) 0% to 45%, 40°C to 50 °C (104 °F to 122 °F) Battery Type and Life 2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense Temperature coefficient 0.1 x (specified accuracy) / °C for <18°C or >28 °C 0.1 x (specified accuracy) / °C for <18°C or >28 °C Safety IEC/EN 61010-1: Pollution Degree 2 Electromagnetic Environment IEC/EN 61326-1: Portable   Package Including:   1X T6-1000 Electrical Tester 1X Test Leads with removable 4 mm probe caps TP38 1X User Manual

Please note: Including battery in the package shipped to UK, Spain, Germany, India, Italy, Malaysia, Singapore, Thailand, France and USA. No battery for other countries. Please note: everything in the package is from originial FLUKE.