New handlebar lock with 2 keys and brass housing, 10mm steel bolt and spring fits Puch M 50 Jet, Cobra 6 GT/GTL/80, Monza 4 S/SL 6 SL Daytona 6G, Kreidler K 54, RS RSH RMC Hercules Sachs Zundapp and others KKR/LKR The total length is approx. 39mm, case diameter (brass part) is approx. 12mm and approx. 26mm long, the steel bolt has a diameter of 10mm and is approx. 13mm long, the last 7mm are flattened and I measure approx. 7.5mm, the guide pin is approx. 15.5mm long and approx. 4mm wide. From the brass housing to the guide pin I measure approx. 16mm The removal of the old steering wheel lock without a key only works if you drill out the entire lock cylinder with a 10mm steel drill up to the steel bolt. (drilling is relatively easy through the soft brass material) Please after the end of