Mud, Sand, or Snow
FOUR TRAC-GRABBERS INCLUDED
Trac-Grabbers are manufactured from rugged EPDM rubber like the tires on your car and can be used over and over again.
Recommended for: 4×4 Trucks and All-Wheel Drive SUVs with Standard or All-Terrain Tires*.
Tires with a max “Girth” of 40”. Girth is the measurement through your wheel and around the tire as a Trac-Grabber would be installed. For a girth greater than 40” the Oversize XL model is required.
While some situations may only require a single set of Trac-Grabbers to be installed, one on each Drive Wheel is best for the most extreme situations.
We accept payment by any of the following methods:
PayPal
We offer FREE Expedited Shipping on all orders!
Your order will be dispatched within one working day of receiving payment (Monday-Friday) and you should expect to receive it 1 to 3 business days after dispatch (orders sent USPS Priority Mail Medium Flat Rate Box).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it. Buyer pays return shipping.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Car's block demensions: 8" (L), 3" (W), 1" (D)
Truck & SUV's block demensions: 8 3/4" (L), 3 1/2 (W), 1 1/2 (D)
Each box contains 2 Trac-Grabbers blocks with straps, and a handy storage bag.
- TIGHTLY secure one Trac-Grabber to each drive wheel. With strap inserted through the slot in the Trac-Grabber, hold the Trac-Grabber on the wheel perendicular to the tire tread with "D" righs on outside facing you. Feed the loose end of the strap through an opening in the wheel from the back side. Feed the end of the strap through the "D" rings, PULLL TIGHT, and secure the secure the strap with the strap with the Velcro to prevent slippage. Loose Trac-Grabber may cause damage to the vehicle! DO NOT INSTALL STRAP THROUGH OPENING NEAR TIRE VALVE STEM!
- Do not drive over 5 mph while Trac-Grabbers are installed.
- Clear away and dirt, mud, or snow that may impede movement or create resistance to direction of travel from all four vehicle wheels.
- With Trac-Grabbers installed, DRIVE IN REVERSE or FORWARD, WHICHEVER IS THE DIRECTION OF LEAST RESISTANCE AND SHORTEST DIRECTION BACK TO STABLE TERRAIN.
- With Trac-Grabbers installed, slowly apply power until the tires rotate and engage the vehicle. As the vehicle begins to move, maintain steady but not excessive power until vehicle reaches stable terrain. Try to avoid spinning the wheels as much as possible. WITH TRAC-GRABBERS INSTALLED ON THE FRONT WHEELS, KEEP THE WHEELS AS STARIGHT AS POSSIBLE.
- REMOVAL: The Trac-Grabbers will become very tight on the wheels during use. TO REMOVE TRAC-GRABBERS FROM THE WHEELS, PUSH THEM BACK TO THEIR ORIGINAL POSITION ON THE TIRE TO CREATE SLACK IN THE STRAP.
- Inspect rubber and straps for wear and tear. If any deformities are evident discard and do not reuse.
Important: Thoroughly inspect wheel wells to make sure your vehicle has sufficient clearance for Trac-Grabbers and straps to make a full and unobstructed rotation. Check all body parts as well as brakes and suspension components. When mounting Trac-Grabbers on front wheels, keep wheels as straight as possible.
All property names, logos, and brands are the property of their respected owners. All company, product and service names used are used for identification purposes only. Use of these names, logos, and brands does not imply endorsement.
Mud, Sand, or Snow
FOUR TRAC-GRABBERS INCLUDED
Trac-Grabbers are manufactured from rugged EPDM rubber like the tires on your car and can be used over and over again.
Recommended for: 4×4 Trucks and All-Wheel Drive SUVs with Standard or All-Terrain Tires*.
Tires with a max “Girth” of 40”. Girth is the measurement through your wheel and around the tire as a Trac-Grabber would be installed. For a girth greater than 40” the Oversize XL model is required.
While some situations may only require a single set of Trac-Grabbers to be installed, one on each Drive Wheel is best for the most extreme situations.
We accept payment by any of the following methods:
PayPal
We offer FREE Expedited Shipping on all orders!
Your order will be dispatched within one working day of receiving payment (Monday-Friday) and you should expect to receive it 1 to 3 business days after dispatch (orders sent USPS Priority Mail Medium Flat Rate Box).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it. Buyer pays return shipping.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Car's block demensions: 8" (L), 3" (W), 1" (D)
Truck & SUV's block demensions: 8 3/4" (L), 3 1/2 (W), 1 1/2 (D)
Each box contains 2 Trac-Grabbers blocks with straps, and a handy storage bag.
- TIGHTLY secure one Trac-Grabber to each drive wheel. With strap inserted through the slot in the Trac-Grabber, hold the Trac-Grabber on the wheel perendicular to the tire tread with "D" righs on outside facing you. Feed the loose end of the strap through an opening in the wheel from the back side. Feed the end of the strap through the "D" rings, PULLL TIGHT, and secure the secure the strap with the strap with the Velcro to prevent slippage. Loose Trac-Grabber may cause damage to the vehicle! DO NOT INSTALL STRAP THROUGH OPENING NEAR TIRE VALVE STEM!
- Do not drive over 5 mph while Trac-Grabbers are installed.
- Clear away and dirt, mud, or snow that may impede movement or create resistance to direction of travel from all four vehicle wheels.
- With Trac-Grabbers installed, DRIVE IN REVERSE or FORWARD, WHICHEVER IS THE DIRECTION OF LEAST RESISTANCE AND SHORTEST DIRECTION BACK TO STABLE TERRAIN.
- With Trac-Grabbers installed, slowly apply power until the tires rotate and engage the vehicle. As the vehicle begins to move, maintain steady but not excessive power until vehicle reaches stable terrain. Try to avoid spinning the wheels as much as possible. WITH TRAC-GRABBERS INSTALLED ON THE FRONT WHEELS, KEEP THE WHEELS AS STARIGHT AS POSSIBLE.
- REMOVAL: The Trac-Grabbers will become very tight on the wheels during use. TO REMOVE TRAC-GRABBERS FROM THE WHEELS, PUSH THEM BACK TO THEIR ORIGINAL POSITION ON THE TIRE TO CREATE SLACK IN THE STRAP.
- Inspect rubber and straps for wear and tear. If any deformities are evident discard and do not reuse.
Important: Thoroughly inspect wheel wells to make sure your vehicle has sufficient clearance for Trac-Grabbers and straps to make a full and unobstructed rotation. Check all body parts as well as brakes and suspension components. When mounting Trac-Grabbers on front wheels, keep wheels as straight as possible.
All property names, logos, and brands are the property of their respected owners. All company, product and service names used are used for identification purposes only. Use of these names, logos, and brands does not imply endorsement.