Ecotex® WR-BLUE is the Ultimate Water Resistant Diazo Emulsion. This textile emulsion is highly resistant to plastisol & water Based inks. Ultra durable solution designed for long print runs extremely water resistant. Before use, Diazo must be added and allowed to activate emulsion. It’s easy, just see Diazo for simple Instructions. Once the Diazo has been mixed it is ready for use. Apply to clean, degreased, dried screen with a scoop coater. Be sure to use appropriate application techniques. Reclaiming Ecotex® WR-BLUE is easy with Ecotex® Emulsion Remover. Requires more water to develop image.
NOTE: This emulsion comes with a packet of Diazo.
Helpful Hints to Ensure Your Emulsion Lasts Longer Once Mixed:
- Always use distilled water to mix the Diazo sensitizer.
- Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced.
- Keep the emulsion lid on tight to preserve air and light leaks.
- Gently mix the emulsion each time before use to help extend the life.
- For long runs over 1,000 shirts – use Ecotex Emulsion Hardener to extend the life of your stencil.
- To ensure best results, date your emulsion once mixed and keep an extra container on hand once the emulsion is about to expire*
Shelf Life:
- 10-12 months
- Activated: 2 Week
Application: Apply to clean, degreased and dried screen with a scoop coater. Be sure to use appropriate application techniques. It’s recommended you eliminate any UV light from entering the room and work under a yellow light.
Exposure Times:
- 80 - 90 seconds with LED Light
- 12 - 13 minutes with 500w Halogen Light
Drying:
- 86 ° to 104 °F (30 ° to 40 °C)
- 30% to 50% humidity
- Good Air Circulation
Shelf Life & Storage:
- 12 months if not exposed to extreme weather conditions or exposed to light
- Mixed with diazo: 1-2 weeks
✔️Pro Tips:
- Always use distilled water to mix the Diazo sensitizer.
- Prep your screen before coating with Ecotex Hyper Haze
- Eliminate any UV light from entering the room and work under a yellow light.
- Use the sharp edge of your scoop coater
- Make sure screen is completely dry before coating emulsion
- Make sure emulsion is completely dry before printing
- Keep the emulsion lid on tight to preserve air and light leaks
- Gently mix the emulsion each time before use to help extend the life
- Write down the day you opened the emulsion on the bottle to better keep track of your chemicals.
- Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced
More Sizes Available!
Click HERE to see all our products on Ebay!
Have You Tried Our Other Products?
- IJFD 5 MIL - Waterproof Inkjet Film Transparency
- Ecotex® Emulsion Hardener
- Ecotex® Emulsion Remover
- Ecotex® Emulsions
- & More!
Payment
Shipping
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
We offer FREE shipping on all orders in the continental USA!
Your order will be dispatched same day after receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Ecotex® WR-BLUE is the Ultimate Water Resistant Diazo Emulsion. This textile emulsion is highly resistant to plastisol & water Based inks. Ultra durable solution designed for long print runs extremely water resistant. Before use, Diazo must be added and allowed to activate emulsion. It’s easy, just see Diazo for simple Instructions. Once the Diazo has been mixed it is ready for use. Apply to clean, degreased, dried screen with a scoop coater. Be sure to use appropriate application techniques. Reclaiming Ecotex® WR-BLUE is easy with Ecotex® Emulsion Remover. Requires more water to develop image.
NOTE: This emulsion comes with a packet of Diazo.
Helpful Hints to Ensure Your Emulsion Lasts Longer Once Mixed:
- Always use distilled water to mix the Diazo sensitizer.
- Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced.
- Keep the emulsion lid on tight to preserve air and light leaks.
- Gently mix the emulsion each time before use to help extend the life.
- For long runs over 1,000 shirts – use Ecotex Emulsion Hardener to extend the life of your stencil.
- To ensure best results, date your emulsion once mixed and keep an extra container on hand once the emulsion is about to expire*
Shelf Life:
- 10-12 months
- Activated: 2 Week
Application: Apply to clean, degreased and dried screen with a scoop coater. Be sure to use appropriate application techniques. It’s recommended you eliminate any UV light from entering the room and work under a yellow light.
Exposure Times:
- 80 - 90 seconds with LED Light
- 12 - 13 minutes with 500w Halogen Light
Drying:
- 86 ° to 104 °F (30 ° to 40 °C)
- 30% to 50% humidity
- Good Air Circulation
Shelf Life & Storage:
- 12 months if not exposed to extreme weather conditions or exposed to light
- Mixed with diazo: 1-2 weeks
✔️Pro Tips:
- Always use distilled water to mix the Diazo sensitizer.
- Prep your screen before coating with Ecotex Hyper Haze
- Eliminate any UV light from entering the room and work under a yellow light.
- Use the sharp edge of your scoop coater
- Make sure screen is completely dry before coating emulsion
- Make sure emulsion is completely dry before printing
- Keep the emulsion lid on tight to preserve air and light leaks
- Gently mix the emulsion each time before use to help extend the life
- Write down the day you opened the emulsion on the bottle to better keep track of your chemicals.
- Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced
More Sizes Available!
Click HERE to see all our products on Ebay!
Have You Tried Our Other Products?
- IJFD 5 MIL - Waterproof Inkjet Film Transparency
- Ecotex® Emulsion Hardener
- Ecotex® Emulsion Remover
- Ecotex® Emulsions
- & More!
Payment
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
Shipping
We offer FREE shipping on all orders in the continental USA!
Your order will be dispatched same day after receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
