Fridge Repair Kit with Highest Quality Ultra Long-Life Japanese Nichicon, Panasonic, and Rubycon Capacitors

FAST SHIPPING - TYPICALLY ARRIVES TO CANADIAN/US CUSTOMERS WITHIN 7 BUSINESS DAYS

This kit contains the parts required to easily repair your fridge's existing control board.

Is your refrigerator suddenly not working properly?  Is it displaying one or more of the following symptoms?

  • The display on the front of the fridge shows lines or dots, and/or it flashes.
  • The Ice dispenser flaps.
  • Fridge can't keep cooling consistently and/or repeatedly tries to start.  You may hear repeated clicks, beeps, and whirling.  Eventually, you might hear the compressor unsuccessfully try to start.
  • Possibly after a power outage, the fridge may take several minutes or hours of clicking and whirling before it finally starts up and operates normally.  Or it may keep trying forever and never start up.  At other times it just sits there silently doing nothing at all.

Most domestic models such as Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Maytag fridges use a variation of the same control board.  One or more capacitors on this control board can fail due to aging and/or voltage spikes, resulting in a variety of weird symptoms.  It's a VERY common and well-known problem.

Start by opening up the back panel on your fridge.  The control board is the large circuit board similar to the one pictured in this listing. Read the model number off of your control board.  Does it match one of the model numbers listed below?  Check the 3 capacitors in a row.  Is the capacitor on the left smaller than the other two?  (See photo)  Then this kit is for you.  If not, look at our "Fridge Control Board Repair Kit W10310240 W10213583 WPW10312695 Maytag JennAir" listing on eBay.

You can buy the newest W10310240A model control board from your appliance dealer to replace your faulty original model control board, but be warned that you may also have to replace your expensive display board due to compatibility issues!  It's safer and less expensive to fix your existing control board.  And you can repair it yourself for $28.50 using this kit. In most cases (but not all), this repair kit will fix the problem and you'll save yourself a lot of money. 

It's not always easy to tell which capacitors may have failed on the control board.  Often failed capacitors look perfectly good, with no bloating or leakage.  The easiest solution is to simply remove and replace all 7 of the suspect capacitors. 

This kit contains a variety of 7 brand new capacitors needed to replace the old capacitors on the refrigerator control boards listed below.  Not all capacitors are created equal.  We ship you the highest-quality, best-performing, Japanese ultra long-life at 105c Nichicon, Panasonic, and Rubycon capacitors.  Beware that other sellers may ship cheap Chinese and/or short-life capacitors.

The repair requires you or a technician to simply replace each of the old capacitors on the control board with the corresponding new capacitor in the kit.  Carefully desolder each capacitor and solder in the replacement capacitor of the same value.  Each of these capacitors has polarity and must be installed with the negative "-" terminal connected to the same solder pad as the original capacitor's negative terminal.  Replacement requires basic soldering skills,the ability to read the values printed on the side of the capacitors, and tools such as a soldering iron, solder wick, and solder.  There are videos on YouTube showing how to desolder and solder electronic parts.

If you are careful, this is an easy repair and should take 10 or 20 minutes.  However, we are not responsible for any damage resulting from an attempt to repair your control board.  And although the replacement of these 7 capacitors typically repairs failed control boards, there is no guarantee that it will fix the problem.  Buy and use at your own risk.

This kit works with many domestic refrigerators from Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Maytag.  It may be used on the following control board model numbers:

12920704
12920710
12920717
12920717SP
12920719
12920719SP
12920721
12920724
129207xx
129207xxSP
W10890094
WP12920710

Canada Shipping:

$2.  Standard shipping via Canada Post.  The package typically takes 3-6 business days to arrive, depending on your location, and is non-trackable.

XPRESSPOST.   Cost dependent on your location.  Faster shipping via Canada Post.  Typically 5 business days maximum and trackable.

PRIORITY.   Cost dependent on your location.  Fastest shipping via Canada Post.  Typically 3-4 business days maximum and trackable.

YOU PAY PUROLATOR (approximately $40).  Fastest, most reliable, super-fast 2-day "I'm desperate!" shipping.  Several purchasers have been desperate to get their fridge up and running as soon as possible.  If you need the kit in 1-2 business days, you can follow this procedure:

1.  First contact me to let me know that you will be using Purolator.  I'll provide you with my pick-up address.
2.  Pay for the kit with free shipping.
3.  Contact Purolator directly and arrange for a package pickup from my address.  You pay for the Purolator shipping.
4.  Email me the shipping label.  I'll be sure to have the kit available for pickup on the scheduled day provided by you.
5.  The shipment is trackable and you receive the kit in 1-2 business days.

FREE.  Local pickup.

USA Shipping:

Free.  Canada Post Small Packet USA Airmail.  The package may take 6-12 business days to arrive and is non-trackable.

Free.  Canada Post Tracked Packet USA.  The package typically takes 7 business days to arrive and is trackable.

The above description is Copyright © 2019.