 |
The best price for the best products . |
40W CO2 Laser Tube 70cm + Power Supply AC110V Engraver Cutter
| 40W | 50W | 60W | 80W | 100W | |
|---|---|---|---|---|---|
| Wavelength | 10600nm | 10600nm | 10600nm | 10600nm | 10600nm |
| Beam diameter | 1.95 | 2.2 | 2.5 | 3.5 | 3.8 |
| Power output(W) | 40 | 50 | 60 | 80 | 100 |
| Triggering voltage(KV) | 22 | 22 | 24 | 28 | 35 |
| Operating voltage(KV) | 15 | 16 | 16 | 18 | 20 |
| Operating current(mA) | 18 | 20 | 22 | 25 | 30 |
| Outer diameter(mm) | 50 | 52 | 55 | 60 | 60 |
| Length（mm） | 700 | 1000 | 1200 | 1600 | 1800 |
| Power stability | ±5% | ±5% | ±5% | ±5% | ±5% |
Laser power supply parameter
- Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
- Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
- Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
- Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
- Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
- Response time (from time of input being available to the output current being up to nominal value): ≤1ms.
- TTL voltage level control: effective voltage level can be high or low through setting.
- Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
- Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
- Environmental requirements: temperature (-10~ 40℃), relative humidity ≤85%.
Packing and insurance:
- We have many years experience in shipping the tube and provide professional packing for them.
- The default shipping ways is by DHL/TNT/UPS/FEDEX air express if the tube was sent from China.
- The delivery time is about 4-5 working days to USA or Western Europe by air express from China.
- We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier.
- The buyer must report to us and courier within 48 hours if the tube damages. If failed to do so, this will result in rejection on the claims.
- The shipping charge we listed is the typical cost to Western Europe, USA and Asia. The other destinations need to be confirmed the exact cost.
- Generally we will ship the order within 24-48 hours including weekend after the full payment is cleared.
- The airway bill number for on-line tracking will be shown at Ebay. You can track the shipment easily.
Tips:
- We accept the return within 15 days after you receive. Please ensure to return in original packing and not been used.
- If the tube or power supply doesn't work as its own fault, we will cover both of sending and return shipping cost and send the new free again depend on the proof.
- The other reason return, the buyer need to cover the both sending and return shipping cost.
- We value every customer,leave positive feedback when payment clears, and appreciate you give us positive feedback .
- If you are not satisfied with a transaction, please contact us and allow us to resolve it before leaving feedback.
- Special requirement, please leave messages in eBay or Paypal.
