JJLEP1™ 2 Player DIY XL Bartop / Tabletop Arcade Cabinet Kit by LEP1Customs
* EASY TO ASSEMBLE WITH ASSEMBLY INSTRUCTIONS AND PICTURES *
This easy to build kit contains the pre-cut, routed and pre-drilled MDF for a DIY Bartop/Tabletop Arcade Cabinet, and is the ONLY kit to feature the following:
- Pre-routed integrated marquee bracket
- Pre-routed baton indents for easier assembly
- Adjustable horizontal monitor positioning
- Pre-drilled holes for mounting two 4" speakers
- Pre-drilled holes for mounting 2 Happ Joysticks
- Pre-drilled holes for cabinet assembly
- Baton supports and the 26 wood screws for basic assembly.
- All batons and slots labeled (except #6, but it is pretty clear where it goes)
- In addition to the front panel with 2 button holes,
we are now also including a blank panel as well. You can use the 2 hole panel with buttons, use the blank panel as-is or add front panel button holes with a forstner bit.
For basic cabinet assembly, you will need the following parts (not included):
That's right, all parts needed to assemble the basic cabinet are included (except for the wood glue)!
For a complete assembly, we suggest the following parts (not included):
- Up to 19" Square LCD Monitor or Up to a 23" Widescreen LCD Monitor
- 4 screws for LCD VESA Mount (4 or 8 washers are suggested)
- 2 Joysticks with HAPP mounting pattern
- 8 Screws, 8 washers, and 8 nuts for joystick mounting
- Up to 18 Standard Arcade Buttons [1 1/8" or 28mm] (14 on control panel, 2 in the front and 1 on each side)
- 2 4" Speakers
- 8 screws, 8 washers, 8 nuts for speaker mounting
- Game system (Raspberry Pi, Game Elf, Pandora's Box, Mini PC)
- Power supply
- Wiring (as needed by Game System, speakers, and monitor)
- Marquee Insert (auction photo shows color laser printed paper)
- Plexiglass to cover LCD (optional/personal taste)
- Marquee backlight (optional/personal taste)
- Light Sandpaper
- Primer
- Paint
Cabinet Dimensions |
Exterior Width | 21.75" |
Exterior Height | 21" |
Exterior Depth | 17.5" |
Interior Width | 20.75" |
Cabinet Specs |
Material | MDF |
Weight | 23 lbs |
The auction picture features our kit unsanded and assembled with the following items that are not included: wood glue and a custom marquee printed on copier paper.
The monitor mount panel is placed in the photo where it is so it could be seen clearly, but ideally it would be placed further back. The last pic was submitted by a customer after they completed their build. If you have any questions before or after the sale, feel free to ask.
-Now Available Separately-
- Customizable Artwork Kits and Custom Design Services
- 34" Tall Arcade Pedestal for Bartop Kits