This item is just the Printed Circuit Board only, NO COMPONENTS included or installed. You will receive necessary instructions and parts list so you can assemble this programmer yourself.

If you would like to order a programmer completely assembled and ready to use, please see:
   https://www.ebay.ca/itm/223469103979
  
Avr High Voltage Parallel Fuse Repair Programmer
  
Don't throw away your locked AVR's! Unlock  them with this easy to use stand alone device. This device is an AVR HIGH  VOLTAGE PARALLEL programmer that is designed to program all fuses, regardless of the current state of the fuses. If you mistakenly programmed the RSTDISBL  fuse, OR disabled the SPIEN fuse, or programmed the wrong values in the CKSEL  fuses, NO PROBLEM! Simply insert any AVR from device list below and connect power. Within one second, fuses will be restored to factory settings. Green LED indicates success, Yellow LED indicates programming error. It's that easy! You can watch a demonstration video here.

No computer required!

Once restored, you can program the AVR using your favorite ISP programmer and software. 

NEVER WORRY ABOUT PROGRAMMING YOUR AVR AGAIN!

To preserve the flash and eeprom contents while repairing the fuses, simply install jumper J1. (In this mode, the programmer will not restore the fuses if the LOCK bits were programmed, the erase function MUST be enabled.) 

YOU MUST USE A POWER SUPPLY THAT EXCEEDS 14.5 VDC with positive center (not included) to ensure reliability in programming. Instructions will be included with purchase. It is a good idea to measure your power supply to ensure correct voltage and polarity. I am trying to keep the cost and shipping weight down, therefore the power supply cannot be included with this item.

       

Socket #1

ATmega16
ATmega16L
ATmega32
ATmega32L
ATmega161
ATmega161L
ATmega164
ATmega164A
ATmega164P
ATmega164V
ATmega164PV
ATmega164PA
ATmega324
ATmega324A
ATmega324P
ATmega324PA
ATmega324V
ATmega644
ATmega644A
ATmega644P
ATmega644V
ATmega644PA
ATmega644PV
ATmega8535
ATmega8535L
ATmega1284
ATmega1284P
     
  

Socket #2

ATtiny2313
ATtiny2313A
ATtiny2313V
ATtiny4313
  
The following
devices are
supported, however
they must
be wired to any
socket.
ATtiny43U****
ATtiny87****
ATtiny88****
ATtiny167****

        

Socket #3

ATmega8515
ATmega8515L
Atmega128****
ATmega162
ATmega162V

       		        

Socket #4        

ATmega8
ATmega8A
ATmega8L
ATmega48
ATmega48A
ATmega48V
ATmega48P
ATmega48PA
ATmega48PV
ATmega88
ATmega88A
ATmega88P
ATmega88PA
ATmega88V
ATmega88PV
ATmega164
ATmega164A
ATmega164P
ATmega164PA
ATmega168
ATmega168A
ATmega168V
ATmega168P
ATmega168PA
ATmega168PV
ATmega328P
ATmega328PB****

     



Socket #5  

ATtiny26
ATtiny26L
ATtiny261
ATtiny261A
ATtiny261V
ATtiny461
ATtiny461A
ATtiny461V
ATtiny861
ATtiny861A
ATtiny861V

     

** (Indicates device not tested)
**** (All SMD pins must be wired directly to the socket)
This is the easiest and most convenient tool you will ever use!

The power supply is not included. I am trying to keep this item as affordable as possible. The extra weight involved would increase the shipping cost greatly. If you would like to purchase the power supply please send me a message.

Customer Satisfaction is very important to me! I want 100% positive ratings!

ONCE PAYMENT HAS BEEN RECEIVED, ITEM SHIPS IMMEDIATELY

(or latest, Next business day)