DIP-4:
EL817 PC817 EL817C Transistor Output:
Current transfer ratio
(CTR: 50~600% at IF = 5mA, VCE = 5V)
High isolation voltage between input
and output (Viso = 5000Vrms)
Creepage distance > 7.62mm
Operating temperature: 110C
Will remain within RoHS compliant version
Compliance with EU REACH UL and cUL(No.E214129),VDE (No. 132249)
SEMKO, NEMKO, DEMKO, FIMKO, CQC approved
817C AMS817C Transistor Output:
Description:
Isolation voltage: 5000V
Creepage distance: >7.62mm
Number of channels: 1
Output type: transistor
Mounting: THT
Collector-emitter voltage: 35V
Operating temperature: 110C
JC817 JC817B JC817C Transistor Output:
Current transfer ratio: 50%-600%
Isolation Voltage: 500V
Operation temperature: 110C
PC817 EL817C EL817 Transistor Output:
Double transfer mold package (Ideal for Flow Soldering)
High isolation voltage between input and output (Viso(rms) : 5kV)
High collector-emitter voltage (VCEO : 80V)
Current transfer ratio (CTR : MIN. 50% at IF=5 mA, VCE=5V)
RoHS directive compliant
P521-1 TLP521-1 Transistor Output:
Number of Channels: 1
Isolation Voltage: 2.5KV
Output Type: Optical transistor
Input Current: 16mA
Output Voltage: 55V
Package Type: DIP
Pin: 4
Pin length: 6mm
Operating temperature: -55C to 100C
Output Type: Optical transistor
DIP-8:
Viper22 VIPer22A Primary Switch:
Fixed 60 kHz switching frequency
9 V to 38 V wide range VDD voltage
Current mode control
Auxiliary undervoltage lockout with hysteresis
High voltage start-up current source
Overtemperature, overcurrent and overvoltage protection with auto-restart
Typical applications cover off line power supplies for battery charger adapters, standby power supplies for TV or monitors, auxiliary supplies for motor control, etc.
The internal control circuit offers the following benefits: Large input voltage range on the VDD pin accommodates changes in auxiliary supply voltage. This feature is well adapted to battery charger adapter configurations.
Automatic burst mode in low load condition.
Overvoltage protection in HICCUP mode
AT24C128 AT24C128 Memory Chip:
Product Category: EEPROM
Manufacturer: Microchip
Mounting Style: Through Hole
Package/Case: PDIP-8
Memory Size: 128 kbit
Interface Type: Serial, 2-Wire, I2C
Organisation: 16 k x 8
Data Retention: 40 Year
Maximum Clock Frequency: 400 kHz
Supply Current - Max: 3 mA
Operating Supply Voltage: 3.3 V, 5 V
Access Time: 900 ns
Brand: Microchip Technology / Atmel
Minimum Operating Temperature: -40C to 85C
Operating Supply Current: 3 mA
Supply Voltage: 2.7V- 5.5V
24C0 Memory Chip:
Type: 2-Wire Serial EEPROM 1K (128 x 8)
Supply Voltage: 5V
Operating Temperature: -40C to 85C
24C512 Memory Chip:
Type: 2-Wire Serial EEPROM 512K (65,536 x 8)
Logic Case Style: DIP-8
Supply Voltage: 5V
Operating Temperature: -40C to 85C
NE555 Timer:
Type: Standard
Number of Internal Timers: 1 Timer
Supply Voltage - Max: 16V
Supply Voltage - Min: 4.5V
Operating Temperature: 0C to 70C
Mounting Style: Through Hole
Package/Case: PDIP-8
Brand: Texas Instruments
High Level Output Current: 200 mA
Length: 9.81 mm
Low Level Output Current: - 200 mA
Operating Supply Current: 2000 uA
LM386N Audio Power:
Power supply range: 4V - 12V
Package Dissipation: 1.25W
Input Voltage: ±0.4V
AT24C02B Memory Chip:
Low-voltage and Standard-voltage Operation
1.8 (VCC = 1.8V to 5.5V)
Internally Organized 256 x 8 (2K)
Two-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bidirectional Data Transfer Protocol
1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility
Write Protect Pin for Hardware Data Protection
8-byte Page (2K) Write Modes
Partial Page Writes Allowed
Self-timed Write Cycle (5 ms max)
High-reliability
Endurance: 1 Million Write Cycles
Data Retention: 100 Years
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23,
8-lead TSSOP and 8-ball dBGA2 Packages
Lead-free/Halogen-free
VIPer12A Primary Switch:
Fixed 60 kHz switching frequency
9 V to 38 V wide range VDD voltage
Current mode control
Auxiliary undervoltage lockout with hysteresis
High voltage start-up current source
Overtemperature, overcurrent and overvoltage
protection with auto-restart
MC34063 DC-DC Control Converter:
Product name: DC-DC 34063API Converter
Working Voltage Range: DC 4.5V- 20V
Voltage Output: High/Low level signal:3.3V TTL output
Detection distance: 3--7M(can be adjusted)
Work temperature: -20C to 80C
Trigger Method: L unrepeatable trigger / H repeatable trigger
MAX485 MAX485EPA RS-485 Low Power Transceiver:
Manufacturer: Maxim Integrated
Function: Transceiver
Data Rate: 2.5 Mb/s
Number of Drivers: 1 Driver
Number of Receivers: 1 Receiver
Operating Supply Voltage: 5 V
Operating Supply Current: 500 uA
Maximum Operating Temperature: -40C to 85 C
Mounting Style: Through Hole
Package/Case: PDIP-8
Brand: Maxim Integrated
Duplex: Half Duplex
Series: MAX485
LM358 LM358DR Dual Power Amplifier:
Two internally compensated op-amps
Internally frequency compensated for unity gain
Large DC voltage gain: 100 dB
Wide bandwidth (unity gain): 1 MHz (temperature compensated)
Wide power supply range:
Single supply: 3V to 32V
or dual supplies: ±1.5V to ±16V
24BC04 Memory Chip:
Internally organized as 512x8(4K)
100kHz(1.8V) & 400kHz(5V) compatibility
Bi-directional data transfer protocol
Low-voltage and standard-voltage operation : 1.8~5.5V
Self-timed write cycle (5ms max)
Write protect pin for hardware data protection
2-wire serial interface bus
8-byte page (1K, 2K) and 16-byte page (4K, 8K, 16K)
Date retention : 100 years write modes
High endurance : 1,000,000 write cycles
Allows for partial page write
LM393 LM393N Dual Voltage Comparator:
Wide single-supply voltage range or dual supplies: 2 V to 36 V or ±1 V to ±18 V
Low input offset current: ±3 nA typ.
Low input offset voltage: ±1 mV typ.
Low input bias current: 20 nA typ.
Low supply current: 0.45 mA (independent of supply voltage 1 mW/comparator at 5 V)
Input common-mode voltage range includes ground
Low output saturation voltage: 80 mV typ. (Isink = 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs
AT24C64 Memory Chip:
Wide 2.7 to 5.5 Operation Voltage Range
Up to 8 devices on a single bus system
Industry standard IIC (I2C) bus
(8048 x 8) 64,536 bits memory
Bidirectional Data transfer protocol
400 kHz Clock Rate
Partial Page Writes Allowed
Self timed write cycle (10mSec Max)
High Reliability
Endurance: One Million Write Cycles
Data Retention: 100 Years
Operating Temperature: -40C to 125C
AT24C16N Memory Chip:
Low-voltage and Standard-voltage Operation
2.7 (VCC = 2.7V to 5.5V)
1.8 (VCC = 1.8V to 5.5V)
Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K), 1024 x 8 (8K) or 2048 x 8 (16K)
Two-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bidirectional Data Transfer Protocol
100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
Write Protect Pin for Hardware Data Protection
8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
Partial Page Writes Allowed
Self-timed Write Cycle (5 ms max)
DIP-14 :
TL084 TL084CN Input Operation Amp:
Technology: J-FET
Supply Voltage - Max: 36V
Number of Channels: 4 Channel
Gain Bandwidth Product: 3MHz
Input Bias Current: 200pA
Input Offset Voltage: 15mV
Supply Voltage - Min: 7V
Operating Supply Current: 1.4mA
Dual Supply Voltage: 3.5V-18V
LM324 LM324N Input Operation Amp:
Brand: Texas Instruments
No. of Amplifiers: 4 Amplifier
Bandwidth: 700kHz
Supply Voltage Range: 1.5V - 16V
Supply Voltage: 3V-32V
Operating Temperature: 0C to 70C
LM339 LM339N Voltage Comparator:
Brand: Texas Instruments
No. of Comparator: 4
Supply Voltage Range: 2V to 36V, 1V to 18V
Operating Temperature: 0C to 70C
Supply Current: 1mA
Supply Voltage: 2V 36V
DIP-16:
TL494 TL494CN Power Supply Controller:
Output Current Max: 0.2A
Output Voltage: 40V
Operating Temperature Range: 0C to 70C
MAX232 SP232EEPE Tranceiver:
Eliminates the Need for a Bipolar 12V Supply
Enables Single Supply Operation from +5V Supply
Operating Temperature -40C to 85C
Receiver Signal Type: Single Ended
Transmitter Signal Type: Single Ended
Typical Single Supply Voltage 5V
74HC595 SN74HC595N Shift Register:
Power supply range: 2 - 6V
8-Bit Serial-In, Parallel-Out Shift
High-Current 3-State Outputs Can Drive Up to 15 LSTTL Loads
Low Power Consumption: 80-uA (Maximum) Icc
tpd = 13 ns (Typical)
Check the Datasheet above for more
DIP-20:
74HC244 Octal Buffer and Line Driver:
IC Output Type: 3-State
Latch Type: D Type Transparent
Logic Case Style: DIP-2