This is 3D printed Jhin Mask, from League of Legends. The Mask Arrives in two parts and must be glued.

With a little effort, this print makes a brilliant stock for an easy to wear Cosplay mask.  The mask shown has been glued and there is a seam from the printing process that can be seen just below the eyes.  It will be near flush but there will be a minor seam visible when you glue the parts, any modelling putty such as Milliputt or Squadron White putty will fill this with ease.

Minor seams and flak/support material may need to be removed or cleaned up. I stress this is not a final product but a 3D printed model, there is always some cleanup required. I maintain 100% satisfaction and happily accept refunds if there are any issues at all. 

All credit to the original artist Killonious for creating this amazing piece. 

Size:

Cheek ridges are 15 cm apart. 

Eyes are 4.5 cm gap from each other.

Whole mask is 27 cm tall

Material: High Quality PLA Plastic.

General painting advice: For Best paint coverage, two/three thin coats of a heavy filler primer with plenty of time to let dry. Any primer works, I’ve tested the cheapest £1 cans of unbranded car primer to Citadel and Hycote branded with little different to the end product. Paint With your choice of paints, Citadel paints, Acrylic and enamel all work. To note you can paint directly onto the plastic but you will need to use several layers as the plastic is absorbent.

Items will typically be the same colour as shown in the images. I tend to use neutral or grey colours however you may get a different than shown depending on my supplier. This allows me to stay competitively priced and keep the item costs down.

Premium PLA makes these pieces sturdy however they can still be delicate and should be treated as such. As this is a 3D printed piece, there's always a chance for an imperfection to slip through unnoticed, if there are any issues please get in touch straight away! Item is shipped securely with durable packing for peace of mind.

Happy painting!