Stock Photo
See pictures for an example of what you will receive.
One (1)
O.E.M. Original Equipment Manufacturer Factory
remote keyless entry fob alarm controller
Transmitter control clicker keyfob controller replacement
FCC ID #: M3N5WY7777A / MN5WY7777A Memory #1or #2 Current Part Number: 25943676 Old Part Number: 25854935 267F-5WY7777A See Item Specifications for more details |
Compatible Vehicle’s 2008 2009 2010 2011 2012 2013 2014 Cadillac CTS with remote start and push button start 2008 2009 2010 2011 2012 2013 2014 Cadillac STS with remote start |
Additional Information: This is a genuine Cadillac remote and will work with the factory remote keyless entry system (RKE) on the cars in the chart above. Your vehicle must have the factory RKE system on it. Customers are responsible to determine if they have this option and to purchase the correct remote for their vehicle. Also, this remote has a #1 on it indicating the driver memory position. There also exists a #2 remote which will work just the same, however, when used it will set the car to the programmed settings for driver #2. Please Note : These vehicles may come with many different remotes. Your remote must look like this one in order for it to work with your vehicle and it must have the same buttons. If you don't have a remote to compare to, simply message us with your VIN # and we will verify the correct remote for your vehicle. |
Programming Transmitter: ..........................Method #1: Use this Procedure for Vehicles with Driver Information Center Buttons ........................... This information is in your Owners Manual in the Drivers Information Center Section. 1. Insert Key and turn to ON position so you can access Driver Information Center 2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays 4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed. 5. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed. 6. To exit programming mode turn key off and remove key. Test remote(s). .............................Method #2: Use this Procedure for Vehicles without Drivers Information Center Buttons ............................... To access this display, the vehicle must be in Park (P) with key in the on position (as far as you can go without cranking engine) 1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 2. Press and hold the trip odometer reset stem for three seconds. The message REMOTE KEY LEARNING ACTIVE will display 3. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed. 4. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed. 5. To exit programming mode turn key off and remove key. Test remote(s). -------------------------------------- Method #3: Visit your local locksmith or dealer (as a last resort) they can program the remote to your vehicle's installed RKE system with diagnostic programming equipment. |
How to find out if this remote is compatible with your Vehicles’ installed RKE System
If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.
1. Check the back of your current or old keyless remote to match FCC ID /Part #’s.
2. Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
5. All cut keys are subject to a $20 deduction from the refund
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV ID’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.