Upgrade or replacement wiring harness for a
Gibson Les Paul (or style) electric guitar.
LONG SHAFT POT VERSION
Volume, Volume, Tone, Tone, 3 Way Toggle
Switch, and Input Jack – USA Spec
Our custom harnesses are made to the
absolute highest of standards, meticulously inspected, and sent out ready for
installation.
Built with the quality of workmanship you
would expect from 10+ years experience, and 1000’s of harnesses wired.
Using only professional grade components and
materials.
Giving you confidence in both the longevity,
and most importantly, the performance of these parts.
We deliberately leave an extra amount of
length between wired connections. Ensuring that the harness will fit correctly,
and that the components and connections will not break from being overly tight.
(Please contact first if you are unsure of
what you require in regard to component size etc)
Components:
-Switchcraft
USA - 1/4" Mono Input Jack
THE industry standard for input jacks
with a long and proven track record. EVERY time you plug in your lead you will
know it has the strength and reliability to hold. Most importantly it will not
fail on you with frustrating crackles and loss of signal.
Straight
3 way, Toggle Switch - Realtone
Heavy duty and reliable Straight Toggle
Switch, 8mm thread length, 12mm diameter, chrome finish
-Sprague
USA .022 mfd Orange Drop Tone Capacitor
Sprague Capacitors have a well renowned,
50+ years, reputation for reliability, stability, and consistency in tone with
no microphonics. They are a polypropylene and aluminium foil capacitor with orange
flame retardant epoxy shell.
-CTS
USA 500k LONG SHAFT Precision Volume and Tone Pots
- Split Shaft
These are the best quality pots available.
The precision audio taper gives you a smoother and more accurate response, with
a quality brass
shaft and tighter resistance tolerance. USA spec 9.5mm diameter and 19mm length
brass threaded collar (Total length of the shaft to the top of the spline is 28.6mm),
24 spline (fine) brass split shaft 6mm, 24mm Pot casing diameter, 2 x Nut, 1 x Lock Washer, 1 x Dress Washer.
-Treble
Bleed Circuit
0.001
mfd Capacitor + 120k 1/4 watt resistor wired
in parallel
A “Treble Bleed” circuit is added to the
volume pot/s to improve taper and remove the unbalanced roll off. This keeps
your clean tones clean and the high end frequencies consistent when turning the
volume up and down through 1-10. This is the perfect simple upgrade if you use manual
volume swell as an effect. Or if you are using your guitar volume pot to react
with and against overdrive, distortion, or fuzz effect pedals.
-Vintage
Cloth Wire
Quality thick, 22 Gauge, cotton braided,
wax insulated, vintage style, pull back wire used between components.
IMPORTANT POINTS TO NOTE:
-
Switches - Do not include tips (unless otherwise
described).
-
Pots – Do not include knobs (unless otherwise
described).
-
A separate earth wire (generally runs under a
bridge) is not included, but can be if you request/message us.
-
Listing photos are stock photos for advertising.
The harness you receive will have the
exact top of line parts as per photos/description. The workmanship will be of
the same highest quality with all parts thoroughly tested.
-
The majority of all components are US (imperial)
measurement parts. CTS pots require a 3/8" hole diameter. For metric /import/Asian
made guitars and basses you will generally need to widen mounting holes.
Import/metric knobs and switch tips will/may not fit correctly and will
possibly need to be replaced.
-
Depending on the thickness of control plates or
body cavities you may need to add an extra washer or two on the inside of the
pot thread to lower the overall height of the pot knob.
-
The harness will be delivered fully soldered,
including switches and jacks. To run through body cavities, jacks and switches
may/will need to be de-soldered and re-soldered.
-
All harnesses are wired in a “modern” style. If
you require a 50’s style wiring (or any other alterations) please message
IMMEDIATELY after purchase. Otherwise, your harness will be posted within 24hrs
(on average) and it will be too late to make changes.
-
We are ALWAYS available to help if you get
stuck. If you run into any issue when soldering your new harness to your
existing pickups/switches/ground wires please mail us. Harnesses are always
tested and are 100% correct and without fault. Generally, if you experience a
problem when installing it will be due to a short/earthing/backwards soldering
issue. We can talk you through the correct wiring!
-
Upon
cleared payment, all small items (pedals, wiring etc) are usually posted within
24-72hr
-
Guitars
and Basses are packed on Monday (courier collection Tuesday) and Thursday (for
courier collection Friday)
Meaning, if your purchase is on a Thursday
(after 1pm), Friday, Saturday, Sunday, or Monday (before 1pm) it will be
couriered Tuesday.
If your purchase is on Monday (after 1pm),
Tuesday, Wednesday, or Thursday (before 1pm) it will be couriered Friday.
We take great care and pride in making
sure guitars are carefully set up and packed correctly for transport, so we do
not rush this step.
The String Switch Noise store operates
primarily as an online business.
However, we do have a dedicated showroom
30min south of the Brisbane CBD.
By appointment we are available Monday-Friday
10am-5pm to test out and pick up purchased items.
Please call or contact us directly through
the website.
String
Switch Noise
---Shipping---
---
International delivery is possible for most items and can be arranged at exact
cost of shipping. However, there are some restrictions with regions and package
size. Please contact us first BEFORE making any purchase to check if an item
can be delivered, and to organise the ACTUAL delivery costs. International
shipping pricing (if found on listing) is an estimate only (it may be more, but
it also may be less). Any applicable customs, duties, or taxes that your
country may charge is solely the responsibility of you the buyer. Any questions you may have about this should
be directed to your local countries authorities.
--- We
proudly strive to send out all orders within 24 hours of purchase and/or
receiving cleared payment (apart from holidays and weekends). However please
allow up to 72hrs for packing and courier pickups. Once your item is packed you
will receive notification and relevant tracking number and courier/postal
details.
---
Small items such as effect pedals and wiring harnesses are sent via Australia
Post standard service, with tracking ONLY. Both domestically and
internationally. No responsibility will be taken from us for the loss or damage
of an item by Australia Post. At your request, signature upon delivery or
postal insurance can be added for the additional cost. Please contact us before
purchase, or immediately after purchase.
---
Australia wide, guitars are sent via courier delivery with full insurance,
tracking, and signature upon delivery services. Guitar packages MAY be sent via
Australia Post if the delivery area is in a remote region/outside normal
courier delivery areas/outside normal costs (and the package size is under
105cm long).
---
Courier deliveries can NOT be sent to a PO Box, Parcel Locker, or Parcel
Collect service. They must be sent to a physical address, where someone can
sign for the item on arrival.
---
All items are packed to the highest degree for transit. Proudly, our packaging
is at the highest of standards, with the best reputation you will find anywhere
in the industry. This comes from 2500+ guitars (and counting) being sent
without issue both Australia wide and internationally over 8+ years (and
counting). A great amount of pride and detail goes into making sure every item
arrives safe and in a timely manner. Pedals and small items are packed in
multiple layering of bubble wrap and double corrugated shipping cardboard.
Guitars, pending the instrument, have strings de tuned so there is no tension
on the neck and headstock. Neck/body /headstock are wrapped separately in
multiple bubble wrap layers, high density foam and/or cardboard reinforced. If
applicable it is then placed in gig/soft case or hard case. If in gig/soft case
it is once again bubble wrapped/foam reinforced before being boxed. Each
package/box is custom cut and fit in heavy duty double corrugated shipping
cardboard. All voids are padded out and the body edge, base, and top of head
stock foam reinforced/padded. Finally, the boxing will have copious amounts of
high visibility “Fragile” and “This way up” warning labels.
--- We
are also extremely environmentally conscious. We re use and recycle almost all
bubble wrap, foam, and cardboard packaging materials.
---INFO & TERMS---
--- We
do not accept any trade, trade ins, consignment, or direct customer purchases.
---
All payments to be made in full at time of purchase. The are no holds,
deposits, or layby.
---
Payment can be made by Paypal, Credit Card (through Paypal), Bank
Deposit/Online Transfer, Afterpay, or ZIP.
--- If
payment is made via Paypal goods and service, the item will ONLY be
posted/couriered to your registered Paypal address (NO alternative address).
This is to ensure the Paypal buyer and seller insurance protection is valid.
---
All photos are our own and are of the actual item being offered for purchase.
We
NEVER use stock photos.
An
extensive amount of time and effort is put in to accurately show the items true
condition, colour, and shape. Though please realise the limitations of
photography. Images and colours can be perceived differently depending of the
type and quality of the device it is viewed on.
---
Advertised photos form a large part of the representation of the items
condition. Please view the photos
carefully as well as reading all item descriptions and/or condition text. Whilst every effort is made to photograph all
parts of items, not every little dimple/micro scratch can or will be
photographed. We always photograph any and all large cosmetic flaws, such as
paint chips/cracks/large dents, that we consider to be significant.
---
Cosmetically, items are as per detailed photos and/or descriptions.
Functionally, all pots, jacks, switch and machinery components are working
without issue, and serviced upon arrival. Each item is tested and/or
serviced/set up before listing. It is also tested again moments before
packaging, after purchase, to insure it is 100%.
---Guitars
and basses are set up with action at a standard with no playability issues,
unless otherwise described. However
please understand no one set-up is right for everybody. If you prefer a
different action height/tuning/string gauge please adjust at your own liking.
Please also realise that almost all items are used, and most are 20-30+ year
vintage instruments/effects. They will exhibit some wear and tear. If you need
detailed specifics, extra information/on the bench specs can be given about
anything you require. Please do not hesitate to ask if this is necessary.
--- No
refund will be given for change of mind. There will be no warranty or refund
given other than dead on arrival, broken, or faulty that is NOT already
described and outlined in the descriptive text and detailed photos. In the
HIGHLY unlikely event, there is damage in transit, a postal/courier insurance
claim will be made to recover the cost of damage. However, we are always happy
to help and work through any issue, in the rare event that one arises.