Please note: This thermometer is made by Fluke in China.The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!
Features:
| Functions | Range | Resolution | Accuraty |
AC Voltage | 4.000 V | 0.001 V | 1.0 % + 3 |
(40 Hz to 500Hz)¹ | 40.00 V | 0.01 V | |
400.0 V | 0.1 V | ||
150px0 V | 1 V | ||
DC Voltage | 4.000 V | 0.001 V | 0.5 % + 3 |
40.00 V | 0.01 V | ||
150px0 V | 1 V | ||
AC Voltage（mV） | 400.0 mV | 0.1 mV | 3.0 % + 3 |
DC Voltage（mV） | 400.0 mV | 0.1 mV | 1.0 % + 10 |
Diode² | 2.000 V | 0.001 V | 10% |
Resistance | 400.0 Ω | 0.1 Ω | 0.5 % + 3 |
（ohm） | 4.000 kΩ | 0.001 kΩ | 0.5 % + 2 |
40.00 kΩ | 0.01 kΩ | 0.5 % + 2 | |
400.0 kΩ | 0.1 kΩ | 0.5 % + 2 | |
4.000 MΩ | 0.001 MΩ | 0.5 % + 2 | |
40.00 MΩ | 0.01 MΩ | 1.5% + 3 | |
Capacitance³ | 40.00 nF | 0.01 nF | 2 % + 5 |
400.0 nF | 0.1 nF | 2 % + 5 | |
4.000 μF | 0.001 μF | 5 % + 5 | |
40.00 μF | 0.01 μF | 5 % + 5 | |
400.0 μF | 0.1 μF | 5 % + 5 | |
1000 μF | 1 μF | 5 % + 5 | |
AC Current μA | 400.0 μA | 0.1 μA | 1.5 % + 3 |
(40 Hz to 400 Hz) | 4000 μA | 1 μA | |
AC Current mA | 40.00 mA | 0.01 mA | 1.5 % + 3 |
(40 Hz to 400 Hz) | 400.0 mA | 0.1 mA | |
AC Current A | 4.000 A | 0.001 A | 1.5 % + 3 |
(40 Hz to 400 Hz) | 10.00 A | 0.01 A | |
DC Current μA | 400.0 μA | 0.1 μA | 1.5 % + 3 |
4000 μA | 1 μA | ||
DC Current mA | 40.00 mA | 0.01 mA | 1.5 % + 3 |
400.0 mA | 0.1 mA | ||
DC Current A | 4.000 A | 0.001 A | 1.5 % + 3 |
10.00 A | 0.01 A | ||
Led Backlight | Yes | ||
| ¹All currents, frequencies, and duty cycles range from 1 % to 100% of the range. Unspecified input value below 1 % of range。 | |||
| ²Typically, the open circuit test voltage is 2.0 V and the short circuit current is < 0.6 mA。 | |||
| ³Specifications do not include errors due to test lead capacitance and capacitance plates (up to 1.5 nF for a range of 40 nF)。 | |||
| Functions | overload Protection | Input impedance (nominal) | Common mode rejection ratio | Conventional mode suppression ratio |
AC Voltage | 1000 V¹ | >10 MΩ <100 pF | under DC Current， | '- |
50 Hz or 60 Hz ，>60 dB | ||||
AC Voltage（mV） | 400 mV | >1MΩ，<100 p | 50 Hz or 60 Hz ，> 80 dB | '- |
DC Voltage | 1000 V¹ | >10 MΩ <100 pF | under DC Current ， | 50 Hz or 60 Hz ，> 60 dB |
50 Hz or 60 Hz ，> 100 dB | ||||
DC Voltage（mV） | 400 mV | >1MΩ，<100 pF | 50 Hz or 60 Hz ，> 80 dB | '- |
1106 V Hz MAX | ||||
| General technical indicators | |||||
Maximum voltage between any terminal and ground | 1000 V | ||||
LCD | 4000 counts, updated 3 times per second | ||||
Battery Type | 2 AA，NEDA 15A，IEC LR6 | ||||
Battery life time | Minimum 500 hours (LED test mode and 50 hours without load. In case of load, battery life depends on the type of LED being tested.) | ||||
| Temperature | |||||
work Temperature | 0 °C to 40 °C | ||||
Store Temperature | '-30 °C to 60 °C | ||||
| relative humidity | |||||
Store Temperature | Non-condensing (<10°C) | ||||
| 10 °C to 30 °C 时，< 90% RH； | |||||
| 30 °C to40 °C 时,< =75% | |||||
| 40 MΩ | |||||
| 10 °C to 30 °C 时，< 80% RH； | |||||
| 30 °C to 40 °C 时，<= 70% | |||||
| Altitude | |||||
Working Temperature | 2000 m | ||||
Store Temperature | 12000 m | ||||
Temperature Coefficient | 0.1 X（Accuraty）/°C (<18 °C or >28 °C) | ||||
Current input fuse protection | 440 mA、1000 V Fast-melting，Only specified Fluke parts. | ||||
11A、1000V Fast-melting，Only specified Fluke parts.。 | |||||
11A、1000V Fast-melting，Only specified Fluke parts.。 | |||||
Size（H x W x L） | 183 x 91 x 49.5 mm | ||||
Weight | 455 g | ||||
Safety | IEC 61010-1，IEC61010-2-030 CAT III 600 V，CAT II 1000 V，Pollution level 2 | ||||
Electromagnetic environment | IEC 61326-1： Protable | ||||
Electromagnetic compatibility | Applicable only in Korea | ||||