ARDUINO LILYPAD USB ATMEGA32U4

The LilyPad Arduino board has been developed for wearables and e-textiles (electronic textiles) applications. It can be sewn on fabrics and the like, sensors and actuators can be connected with conductive threads. The board is based on the ATmega32U4.

Characteristics

  • Operating frequency: 8 Mhz.

  • Micro USB connector

  • JST battery input connector

  • ON / OFF switch

  • Supports Serial and USB communication

  • I2C communication

  • 9 digital I / O pins

  • Software automatic reset and bootloader initialization

  • Diameter Ø50

Package includes

  • 1 Arduino ATMega32U4 board

 Some features in English

The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4. It has 9 digital input / output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started.

The LilyPad Arduino USB differs from previous LilyPad boards in that the ATmega32u has built-in USB communication, eliminating the need for a separate USB-to-serial adapter. This allows the LilyPad Arduino USB to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board

The Arduino LilyPad USB has been designed to be used with wearables and e-textiles. It can be sewn to fabric using conductive thread, connecting it also to similarly mounted power supplies, sensors and actuators. The board comes pre-assembled and tested and can simply be programmed via the Arduino IDE, giving a platform for design and experimentation using fabrics with light and sound, etc.

Characteristics

·         8MHz Resonator

·         Micro USB connector

·         JST connector for battery input

·         On / Off switch

·         Serial and USB communications

·         Supports I2C (TWI) communications

·         9x Digital I / O pins

·         Automatic software reset and bootloader initialisation

·         Dimensions Ø50mm

The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4. It has 9 digital input / output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started. The Arduino LilyPad USB has been designed to be used with wearables and e-textiles. It can be sewn to fabric using conductive thread, connecting it also to similarly mounted power supplies, sensors and actuators. The board comes pre-assembled and tested and can simply be programmed via the Arduino IDE, giving a platform for design and experimentation using fabri