close
close
close
close
close
Zufriedenheitsgarantie (25 ratings)

Brake Caliper Adapter VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta ZR17 Brake System Golf 4 R32 334x32

  • for front axle: Golf MK1, MK2, Mk3, Passat, Corrado, Jetta, Polo, Seat Toledo
  • brake caliper: Porsche Cayenne or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T
  • brake disc: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A
Epytec-ordernumber: 266

Customer ratings

(5)
Von Francois am 06.02.2023
Ok
(5)
Von Heimana am 20.07.2022
Excellent produit ,conforme ma commande
(5)
Von manuel am 20.03.2022
Hat alles super gepasst.Beratung war auch super.
(3)
Von Unbekannt am 01.10.2021
Leider nicht 100 passgenau
(4)
Von Unbekannt am 19.05.2021
Colis bien reu et superbe qualit
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Robert am 19.03.2021
Top Qualitt

All ratings

X
(5)
Von Francois am 06.02.2023
Ok
(5)
Von Heimana am 20.07.2022
Excellent produit ,conforme ma commande
(5)
Von manuel am 20.03.2022
Hat alles super gepasst.Beratung war auch super.
(3)
Von Unbekannt am 01.10.2021
Leider nicht 100 passgenau
(4)
Von Unbekannt am 19.05.2021
Colis bien reu et superbe qualit
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Robert am 19.03.2021
Top Qualitt
(5)
Von Nicolas am 02.01.2021
Rien a dire trs bon montage
(5)
Von NICOLAS am 04.11.2020
128077128077128077128077128077
(5)
Von NICOLAS am 04.11.2020
128077128077128077128077128077
(5)
Von NICOLAS am 04.11.2020
Schnelle Lieferung und sehr gute Qualitt. Vielen Dank
(5)
Von NICOLAS am 04.11.2020
Schnelle Lieferung und sehr gute Qualitt. Vielen Dank
(5)
Von olivier am 20.09.2020
Les adaptateurs ce monte parfaitement rien redire merci je recommande cette article
(5)
Von olivier am 20.09.2020
Les adaptateurs ce monte parfaitement rien redire merci je recommande cette article
(5)
Von olivier am 03.09.2020
Ce monte parfaitement trs bon produit Merci
(5)
Von olivier am 03.09.2020
Ce monte parfaitement trs bon produit Merci
(5)
Von Laszlo am 25.04.2020
Gutes Qualitt, einfach zu montieren, alle Dimensionen passen
(5)
Von Lars am 12.12.2019
Super schnelle Abwicklung Top Passgenauigkeit Gern wieder
(4)
Von Martin am 08.10.2018
Adapter grundstzlich sehr gut verarbeitet Leider muss man bei der Montage am G60 Radlagergehuse das Gehuse anpassen bzw zerschneiden was fr mich keine Option war Adapter wurde deswegen zurck gesendet Danke trotzdem Mit freundlichen Gren Martin Geder
(5)
Von valtpt9 am 25.10.2017
Many thanks
(5)
Von andy180488 am 03.09.2017
..
(5)
Von johncena2142 am 30.07.2017
sehr passgenau super
(5)
Von miauzz am 29.10.2016
wie immer alles bestens blitzversand vielen dank ŸŸŸ¼

Brake caliper adapter for the Golf 2, 3 series (narrow axle) to be able to drive the Golf 4 R32 brake disc 334x32mm in connection with the Brembo/Porsche Cayenne ZR 17 brake calipers.

Suitable for the following vehicles:

  • Golf MK1 (only with G60 wheel bearing housing)
  • VW Golf MK2 and MK3
  • VW Passat
  • VW Corrado
  • VW Jetta
  • VW Polo
  • Seat Toledo

Required components:

  • brake calipers: Porsche Cayenne  or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T
  • brake discs: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A
  • brake pads: from 18 inch calipers reference 7L0 698 151 J
  • Brake disc must be redrill to 4x100 (can also be done in our house)

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • better engine performance
  • suitable for 17 inch rims
  • components come from the production series of VW
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • including set of mounting screws

Delivery:

  • 2x brake caliper adapters for Golf MK1, MK2, MK3, Scirocco Passat Corrado Jetta Polo G60
  • high strength mounting screws   
  • material certificate

The "nose" on the axle pin / stub must be adapted by cutting / grinding it.

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
Materialzertifikat We deliver this adapter with a material certificate. You can also register easier your adapter to the vehicle inspection

Pay safe and easy!

We propose different payment methods:

Überweisung PayPal PayPal: Kreditkarte PayPal: Ratenzahlung PayPal: Rechnung

Fast delivery, directly after purchase!

Following your order, you will receive a confirmation. If your order contains documents (material certificate), they are sent to you by email.

Our shipping advantages:

  • daily sending of the orders
  • the delivery time amounts abroad to 3-4 working days
  • 100 days right of withdrawal

Technical specification

  • Material: Stahl (hochfest)
  • Surface:
  • Fitting location: vorne
  • Ventilated / unaerated:
  • Number of holes: mm
  • Hole circle: mm
  • Diameter: mm
  • Strength: mm
  • Height: mm
  • Number of lines: 0

Why should you buy from us?

Made in Germany

Made in Germany

Beware of low quality fakes.Unlike other manufacturers, we do not produce in low-wage countries. Our products are manufactured with high quality materials and the latest high-precision machines.

Technischer Support

Technical support - Our technicians also advise after purchase

We develop our products ourselves. We know perfectly the application of our products and we can answer all the questions from our customers.

Geld zurück Garantie

100% satisfaction guarantee

We want to convince you of our quality and and our services. That is the reason why we extended the right of withdrawal from 14 to 100 days

TÜV-Eintragung

Uncomplicated registration to the vehicle inspection

Due to the documents that we deliver to you and EPYTEC label on our products, the competent authorities in your country can easily register your article.

We notice you that this article is designed for racing cars, sports cars. The use of this adapter must be registred for the public traffic by the competent authorities in accordance with paragrah § 21 StVZO (German Motor Vehicles Regulations). Get information by the competent authorities on this subject in your country. For the registration, we deliver a material certificate, if available.