Lieferumfang

RSI DCV250 Outdoor Motion Viewer / Überwachungskamera

Betrieb über 3x AA Batterien (nicht im Lieferumfang)

Zustand

gebraucht, gereinigt, getestet

Der Artikel befindet sich in einem voll funktionsfähigen Zustand

Gehäuse beschädigt - keine Funktionsbeeinträchtigung

Artikeldetails

The Outdoor MotionViewer Model DCV is a wireless, battery operated, outdoor motion activated camera designed for use in RSI Video Technologies security systems. Motionactivated cameras are intended for applications where video verification of intrusion alarms is necessary or desired. The DCV consists of a digital camera, a passive infrared motion detector, and S2 VIEW spread spectrum, videofied interactive, encrypted wireless cicuitry for secure two way communications with the control panel. The camera consists of a CMOS black and white sensor and an 85 degree, wide angle lens. Two infrared LEDs provide a night illumination distance of up to 30 feet/ 6 meters. For motion or movement detection, a Fresnel lens inside the cover captures up to a 40 foot wide, 85 degree angle passive infrared pattern depending on the temp and local conditions. The base allows for gimble arm mounting and waterproof casing. A tamper function provides cover tamper detection. The MotionViewer is typically installed to secure outdoor areas where there is a temperature fluctuation and areas where broad viewing/ detection coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector transmits a signal and activates the camera, which captures a 10 second digital video segment. The control panel recieves the signal and responds according to system configuration/programming. The alarm and video segment are reported via the control panel to the central monitoring station. The detector is powered by three lithium batteries that can last up to four years or more, depending on the amount of detector activity and ambient temperature

•  S2View® — Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
•  Camera- CMOS black and white sensor with 85° wide angle lens and video resolution of 320 x 240 pixels.
•  Supervised—transmits a check-in/status signal to the panel every 8 minutes indicating tamper state and battery status.
• Tamper- Provides cover-open tamper detection. > Lithium batteries- last at upto four years (estimated)
• Night illumination- up to 30 feet/6 meters distance using two infrared LEDs > Motion detector- Dual-element, passive infrared with Fresnel lens up to 40 ft./ 12m wide 85 degree coverage.
• Camera begins filming in fewer than 100 milliseconds after the PIR detects motion.
• Camera is fully weatherproof and can withstand temperatures from -20° to 140° F (-30° -+65° C).