DSLRKIT PSE8PGK Gigabit PoE+ Switch
8 Ports PoE(Power Over Ethernet) Switch
IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)
Auto Detection Powered Device
AC Input: 100V ~ 240V
52VDC up to Max. 30W/port, 8ports Total budget 120Watt
10/100/1000Mbps
It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 8 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.
Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Features:
- Up to 30w/port of Power on
- Complies to IEEE 802.3af/802.3at PoE standard
- Compatible with All IEEE 802.3af/802.3at
- Safe: Low power Devices Receive Only the Power They Need
- Safe and Reliable Power to WLAN Access Points
- Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
- Supports 10/100/1000 Base-T
- Compact Design Fits Easily in WLAN Access
- Plug-and-Play no configuration required
- Each port supports auto MDI/MDIX
Specification:
|
ALL LAN Port: |
Standard 1000Mbps Ethernet port. can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5e/6 cable。 |
| PoE LAN Port 1-8: | any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs) |
|
LED |
Power (Red) |
|
PoE In-Use (No LED) |
|
|
LNK / ACT(Green) |
|
|
Product Dimensions |
200mm W x 118mm D x 45mm H |
|
Weight |
930g(switch and Power cable) |
|
Power Requirement |
110~240V AC, 50-60 Hz |
|
Power Consumption |
120Watts maximum |
|
PoE Standard |
IEEE 802.3af, IEEE802.3at |
|
PoE Power Output |
52VDC, Max. 30Watt/port, 4ports Total budget 120Watt |
|
PoE Power Supply Type |
pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan |
|
PoE Power Budget |
PoE: Max. 110W |
|
Regulation Compliance |
FCC Part 15 Class A, CE |
|
Operating |
Temperature: 0~50 Degree C, Relative Humidity: 20~95% |
|
Storage |
Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing) |
|
Standards Compliance |
IEEE 802.3: 10Base-T |
|
IEEE 802.3u: 100Base-Tx |
|
| IEEE 802.3z: 1000Base-Tx | |
|
IEEE 802.3x: Flow Control |
Item Included:
DSLRKIT PSE8PGK PoE switch x1(with Retail Box)
AC Power Cable x1