Description:
It is a learning code wireless remote control switch, whose output / working way can be changed as you like, and it is easy to match the transmitter. It has small volume, stable and reliable performance and high receive sensitivity.
Features:
1. This remote control switch is designed to control a wide variety of electronic devices with a wireless signal.
2. It covers application area from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
3. Extremely easy to set up and use.
4. Radio frequency identification technology.
5. It has small volume, stable and reliable performance and high receive sensitivity.
Wireless digital identification technology, each switch has independently password, do not interfere with each other.
Wireless RF remote control, no direction, the signal can pass through walls.
No need wiring, can saving wire costs, saving time and effort.
Provide passive switch: NO is normally open port, COM is common port, equivalent to on and off, and when the relay is energized, NO and COM connected.
Specification:
Receiver:
Operating voltage: DC 12V
Operating frequency: 315MHz
Receiver sensitivity: <-105dB
Encoding type: Fixed code, welding code to achieve the pairing (oscillation resistance is 820K)
Size: 32 x 32 x 16.5mm
Remote Control Transmitter:
Working voltage: DC 12V - Battery A23
Frequency: 315MHz
Encoding type: Fixed code
Firing range: 100 meter (the actual use is about 10-30 meters)
Size: 63 x 39 x 11.5mm
Shock resistance: 4.7M
Learning and coding method:
Press the receiver learning button once until the indicator flashes once, then press the remote control button. Learning is completed.
Control Mode:
1). Self-Lock Mode: Press->On;
Press again->Off (Need 1 channel switch and 1 remote control button.)
Press one button for working/ ON. Press the same button again for stopping/ OFF.
2). Inter-Lock Mode: Press->On;
Press other button->Off (Need 1 channel switch and 2 remote control buttons.)
Press one button for working/ ON, press another button for stopping/ OFF.
3). Jog Mode: Press and hold->On;
Release->Off (Need 1 channel switch and 1 remote control button.)
Keep pressing one button for working/ ON. Remove your finger for stopping/ OFF.
Package Included:
1 * Receiver
Instructions/schematic are NOT included. We don't provide technical assistance please make sure that you are familiar with the product before purchasing.